OEM Restraints System Part Replacement Search
2012 Mini Cooper Coupe
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
• Inspection, testing and installation work may only be carried out by expert trained personnel in BMW Service.• Work on components of the airbag system should only ever be carried out with the battery disconnected, the negative terminal post covered and the plug connection of the cable leading to the gas generator disconnected. If only the battery is
disconnected, the following prescribed waiting period must be observed without fail:
1 minute for vehicles from 9/93
• When carrying out straightening and welding work with an electric welder:
• Disconnect battery
• Cover negative terminal (post)
REV: 03/2015
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Replace the following components after airbag triggering:• Driver airbag module [AIRBAG, STEERING WHEEL], Replace faulty components, Replace steering wheel
• Passenger airbag module [AIRBAG,INSTRUMENT PNL]
• Replace airbag module [AIRBAG, FRONT SEAT] and, if necessary, seat cover with upholstery
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Check and/or replace following components after airbag triggering:Satellites (control unit + sensor):
• Inspect visually for mechanical damage
• Satellite, rear left/right [AIRBAG SENSOR,QTR PANEL]
• Satellite, front door [AIRBAG SENSOR,FRT DOOR]
• Satellite, driver's/front passenger side [AIRBAG SENSOR,FRONT]
• Satellite, vehicle centre [MODULE, AIRBAG CONTROL]
Cables and connectors:
• Check cables and connectors for damage, replace if necessary
Seat belt system:
• Automatic reel
• Belt buckle tensioner
• Seat belt height adjustment
• End fitting pretensioner
Seats:
• Seats
• Airbag module
Driver's airbag:
• Airbag module
• Steering Wheel
• Steering column
Front-passenger airbag:
• Airbag module
• Dashboard trim panel (must be replaced with vehicles without replaceable airbag cover!)
• Supporting tube
Head airbag:
• Airbag module
• Cover, A-pillar
• Roofliner
• Cover, B-pillar
• Cover, C-pillar
• Connection/mount (on side frame)
Passive knee protector:
• Trim panels (driver's side)
• Glovebox incl. knee protector (passenger side)
Important!
Only repair those cables which show visible signs of damage. In the event of visible damage, make sure there is only one cable repair in effect after the repair work. If no visible damage can be identified, the entire cable must be replaced. When carrying out repairs to the airbag wiring harness, you must use the spare parts offered in the out Electronic Parts Catalogue (EPC).
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
