OEM Restraints System Part Replacement Search
2013 Kia Forte Koup
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.1. Turn ignition switch OFF.
2. Disconnect the negative cable from the battery.
3. Wait at least 3 minutes before beginning work.
Before removing any of the SRS parts (including the disconnection of the connectors), always disconnect the SRS connector
REV: 09/2019
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FENDER]
NOTE: Replace the crash pad which is damaged while passenger airbag (PAB) is deployed
When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s)
[AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF] When the front side airbag deployed after a collision, replace the seat back as an assembly
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE]
• Deployed Seat belt pretensioner
.
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Steering wheel• Inspect the clock spring for heat damage. If any damage found, replace the clock spring
• After the vehicle is completely repaired, confirm the SRS airbag system is OK
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
