OEM Restraints System Part Replacement Search
2012 Toyota Avalon
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
WARNING! The SRS is equipped with a backup power source, so that if work is started within 90 seconds after disconnecting the negative (-) terminal cable of the battery, the SRS may be deployed1. Turn engine switch off.
2. Disconnect and isolate negative battery cable.
3. Wait 90 seconds.
REV: 06/2012
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Deployed front airbag(s):• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag assembly [AIRBAG,INSTRUMENT PNL]
• Driver side knee airbag assembly [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag assembly [AIRBAG,KNEE BOLSTER]
• Center airbag sensor assembly [AIRBAG MODULE,INTERIOR]
• The front airbag sensor on the impacted side should be replaced after the steering pad, front passenger airbag assembly or driver side knee airbag assembly has deployed. [AIRBAG SENSOR,FENDER]
Deployed side airbag(s):
• Front seat airbag assembly [AIRBAG & SEAT ASSY,FRT]
• Center airbag sensor assembly [AIRBAG MODULE,INTERIOR]
• The side airbag sensor on the impacted side should be replaced after the front seat airbag assembly and/or curtain shield airbag assembly have deployed [AIRBAG SENSOR,SIDE]
Deployed side curtain airbag(s):
• Curtain shield airbag assembly [AIRBAG,ROOF]
• Center airbag sensor assembly [AIRBAG MODULE,INTERIOR]
• The side airbag sensor on the impacted side should be replaced after the front seat airbag assembly and/or curtain shield airbag assembly have deployed [AIRBAG SENSOR,SIDE]
• The rear airbag sensor on the impacted side should be replaced after the curtain shield airbag assembly has deployed [AIRBAG SENSOR,QTR PANEL]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Perform a diagnostic system check• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag assembly
• Driver side knee airbag assembly [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag assembly [AIRBAG,KNEE BOLSTER]
• Front Airbag Sensor [AIRBAG SENSOR,FENDER]
• Side Airbag Sensor [AIRBAG SENSOR,SIDE]
• Rear Airbag Sensor [AIRBAG SENSOR,QTR PANEL]
• Front seat inner belt assembly
• Seat position sensor
• Front seat side airbag assembly [AIRBAG & SEAT ASSY,FRT]
• Curtain shield airbag assembly [AIRBAG,ROOF]
• Front seat outer belt assembly
• Rear seat outer belt assembly
• Instrument panel/ Instrument panel reinforcement
• Front pillar garnish
• Occupant Classification ECU
• Occupant Classification precaution, Check the flatness of the body side that is equipped with the passenger seat
• Headliner
• Attaching points and hardware
• SRS wire harnesses or connectors
• Seatbelts and seatbelt mounting points
• Seats and seat mounting points
• Replace the faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware, sill-bar, etc.)
• Seat belt systems not in use at the time of a collision should also be inspected and replaced if found to be damaged or working improperly
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
