OEM Restraints System Part Replacement Search
2012 Kia Sportage
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn the ignition switch OFF.2. Disconnect battery negative terminal first.
3. Wait at least 3 minutes before beginning work.
REV : 09/2019
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seatbelt pretensioner(s)
• Front impact sensors AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
• Replace the crash pad which is damaged while PAB [AIRBAG,INSTRUMENT PNL] is deployed
When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,FRT DOOR]
• SRS wiring harnesses
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Before doing any SRS repairs, use the GDS Pro to check for DTCs. Refer to the Diagnostic Trouble Codelist for repairing of the related DTCs
• Steering wheel and column
• Inspect the clock spring for heat damage (part of combination switch assembly)
• After the vehicle is completely repaired, confirm the SRS airbag system is OK.
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
