OEM Restraints System Part Replacement Search
2010 Kia Borrego
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn the ignition switch OFF.2. Disconnect battery negative terminal first.
3. Wait at least 3 minutes before beginning work.
REV: 09/2019
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
For front airbag deployment:• SRSCM unit [Module, Airbag Control]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL], [AIRBAG,INSTRUMENT PNL] and or [AIRBAG,KNEE BOLSTER]
• Seatbelt pretensioners
• Front impact sensors
• Any damaged restraint system part
For side/curtain airbag deployment:
• SRSCM unit [Module, Airbag Control]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY] and or [AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s)
• Any damaged restraint system part
For seat belt pretensioner(s) deployment:
• Seat belt pretensioner(s)
• SRSCM unit [Module, Airbag Control]
• Front impact sensor
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Steering wheel and column• Instrument panel
• Clockspring (part of combination switch assembly)
• All airbag system parts and wiring identified by diagnostic unit check
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
