OEM Restraints System Part Replacement Search
2009 Hyundai Sonata
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
• Turn the ignition switch OFF• Disconnect negative battery cable from battery.
• Wait at least three minutes before beginning work
Before removing any of the SRS parts (including the disconnection of the connectors), always disconnect the SRS connector
REV: 06/2012
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s)
• Front impact sensors [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
• Clock spring (when Driver Airbag deployed)
When the seat belt pretensioner(s) deployed after a collision, replace the following items:
• Seat belt pretensioner(s)
• SRSCM (if B1658 detected) [MODULE,AIRBAG CONTROL]
• Front impact sensors [AIRBAG SENSOR,FRONT]
• SRS wiring harnesses
When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE]
• SRS wiring harnesses
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Before doing any SRS repairs, use the Hi-Scan Pro to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.• Steering wheel
• WCS reset and accuracy check should be performed
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
