OEM Restraints System Part Replacement Search
2007 Lexus SC 430
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn ignition switch OFF and remove key.2. Disconnect and isolate negative battery cable.
3. Wait 90 seconds.
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
With a front airbag deployment:• Steering wheel pad/horn button assembly (with airbag) [Airbag, Steering Wheel]
• Instrument panel passenger airbag assembly [Airbag, Instrument Pnl]
• Front airbag sensor (both left and right) [Airbag Sensor, Fender]
• Airbag sensor assembly (center) [Module, Airbag Control]
• Seat belt pretensioners (included in front seat belts)
• Any damaged restraint system part
With a side airbag deployment:
• Front seat airbag assembly [Airbag & Seat Assy, Frt]
• Front seatback assembly
• Airbag sensor assembly (center) [Module, Airbag Control]
• Rear side airbag sensors [Airbag Sensor, Interior]
• Door side airbag sensors (both left and right) [Airbag Sensor, Frt Door]
• All seat belt pretensioners
• Any damaged restraint system part
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
With a front airbag deployment:• Spiral cable [Clockspring]
• Steering wheel
• Instrument panel
• Instrument panel reinforcement
• SRS wire harnesses [Airbag Harness, Interior] or connectors
• Any restraint system part or wiring identified by diagnostic check
With a side airbag deployment:
• Seatback installation part of the adjuster
• SRS wire harnesses [Airbag Harness, Interior] or connectors
• Any restraint system part or wiring identified by diagnostic check
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
