OEM Restraints System Part Replacement Search
2025 Toyota Land Cruiser
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn ignition switch to OFF and remove key.2. Disconnect and isolate negative battery cable.
3. Wait at least 90 seconds.
NOTICE:
When the cable is disconnected/reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
• Drive the vehicle straight ahead at 35 km/h (22 mph) or more for 5 seconds or more.
Depending on the "ACC customize" setting, the background will remain started even when the ignition switch is turned off. For that reason, check the "ACC customize" setting before performing an inspection. When changing the "ACC customize" setting, refer to the precautions for the audio and visual system. When changing the settings, make sure to return the settings to their previous state after the inspection is complete.
NOTICE:
After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 3 minutes before disconnecting the cable from the negative (-) auxiliary battery terminal.
When the cable is disconnected from the negative (-) auxiliary battery terminal and the security lock setting has been enabled, multi-display operations will be disabled upon next startup unless the password is entered. Be sure to check the security lock setting before disconnecting the cable from the negative (-) auxiliary battery terminal.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
REV: 03/2025
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When any of the airbags have deployed due to the collision, be sure to replace all sensors in the damaged areas and center airbag sensor assembly [AIRBAG SENSOR,FRONT; AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,QTR PANEL; AIRBAG SENSOR,FLOOR; MODULE, AIRBAG CONTROL]• Horn button assembly
• Deployed Steering wheel pad [AIRBAG, STEERING WHEEL]
• Deployed Front passenger airbag assembly [AIRBAG,INSTRUMENT PNL]
• Deployed Driver side knee airbag assembly, [AIRBAG,KNEE BOLSTER]
• Deployed Front passenger side knee airbag assembly, [AIRBAG,KNEE BOLSTER]
• Deployed Curtain shield airbag assembly, [AIRBAG,ROOF]
• Deployed Side seat airbag [AIRBAG,FRONT SEAT; AIRBAG & SEAT ASSY,MIDDLE]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Steering pad [AIRBAG, STEERING WHEEL]• Front passenger airbag
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat airbag [AIRBAG,FRONT SEAT]
• Driver side knee airbag [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag [AIRBAG,KNEE BOLSTER]
• Rear seat side airbag [AIRBAG & SEAT ASSY,MIDDLE]
• Rear floor airbag sensor [AIRBAG SENSOR,FLOOR]
• Seat belt pretensioner
• Center airbag sensor [MODULE, AIRBAG CONTROL]
• Front airbag sensor [AIRBAG SENSOR,FRONT]
• Side airbag sensor [AIRBAG SENSOR,FRT DOOR]
• Rear airbag sensor [AIRBAG SENSOR,QTR PANEL]
• Occupant classification ECU
• Perform initialization of the occupant classification ECU
• Seat position sensor [AIRBAG SENSOR,SEAT TRACK]
• Airbag ECU assembly
• Front airbag sensor
• Side airbag pressure sensor
• Floor side airbag sensor
• No. 2 side airbag sensor assembly
• Rear floor side airbag sensor
• Harness and connector
• Replace the faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that was in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
