OEM Restraints System Part Replacement Search
2025 Kia Carnival Hybrid
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn the ignition switch OFF2. Disconnect the negative cable from the battery
3. Remove the engine room fuse box cover
4. Disconnect the service interlock connector
5. Wait at least 3 minutes before beginning to work
REV: 12/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) is/are deployed after a collision, replace the following items:1. When the airbags deployed after a collision, replace the following items.
• Airbag Control Unit (ACU)
• Replace the clock spring if there is any problem after checking the clock spring for damage when the driver airbag is deployed
• Damaged impact sensor
• Airbag wiring harness
2. Check that the airbag system operates normally after repairing the vehicle.
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Inspect the clock spring for heat damage. If any damage found, replaced if there is an abnormality• Steering wheel
• After the vehicle is completely repaired, confirm that the SRS airbag system is OK.
Turn IG ON. The airbag warning lamp should turns off after turning on for 3 • 6 seconds.
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
