OEM Restraints System Part Replacement Search
2025 Mini COUNTRYMAN
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
• Inspection, testing and installation work may only be carried out by expert trained personnel in BMW Service.• Work on components of the airbag system should only ever be carried out with the battery disconnected, the negative terminal post covered and the plug connection of the cable leading to the gas generator disconnected. If only the battery is
disconnected, the following prescribed waiting period must be observed without fail:
1 minute for vehicles from 9/93
• When carrying out straightening and welding work with an electric welder:
• Disconnect battery
• Cover negative terminal (post)
REV: 06/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Replace following components after airbag deployment:Deployed Seat airbag [if deployed]:
• Replace airbag module [AIRBAG,FRONT SEAT]
• Replace airbag module and seat cover with upholstery
• Active head restraint. The gas generator can be replaced up to 5 times. (if equipped)
Deployed Driver's airbag [if deployed]:
• Driver's airbag [AIRBAG,STEERING WHEEL]
• Replace steering wheel
Deployed Front passenger airbag [if deployed]:
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
Deployed Head airbag [if deployed]:
• Head airbag [AIRBAG,ROOF]
Knee airbag [if deployed]:
• AIRBAG,KNEE BOLSTER
Check components for damage, replace if necessary
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Check and/or replace following components after airbag triggering:Satellites (control unit + sensor):
• Read fault memory/ rectify faults
• Sensor B-pillar (left/right) [AIRBAG SENSOR,SIDE]
• Sensor front door (left/right)[AIRBAG SENSOR,FRT DOOR]
• Sensor seat, Driver-/passenger's side[ AIRBAG SENSOR,SEAT TRACK]
• Airbag control unit, vehicle interior [MODULE, AIRBAG CONTROL]
• Front sensor (engine compartment) [AIRBAG SENSOR,FRONT]
Cables and connectors:
• Check cables and plugs for damage, replace if necessary
Seat belt system:
• Automatic reel
• Seat belt tensioner
• Seat belt height adjustment
•Anchor fitting tensioner
• Seat belt buckle
Seats:
• Seats
• Airbag module
• Active head restraint
Driver's airbag:
• Airbag module
• Steering Wheel
• Steering column
•Steering wheel cover
•Steering wheel switch
•Shift paddle for automatic transmission
•Wiring harness
Front passenger airbag:
• Airbag module
• Dashboard trim panel (must be replaced!)
• Supporting tube (if damaged)
Side airbag, front:
• Airbag module
•Door trim panel
•Door in white
• Seat
Head airbag:
• Airbag module
• A-pillar trim panel
• Roofliner
• B-pillar trim panel (if damaged)
• C-pillar trim panel (if damaged
• Connection/mount (on side frame)
Knee airbag:
• Airbag module
• Trim panel (driver's side)
• Lower section of glove box
• Knee protection (driver's and passenger's sides)
• Check components; replace if necessary
Important!
Only repair those cables which show visible signs of damage. In the event of visible damage, make sure there is only one cable repair in effect after the repair work. If no visible damage can be identified, the entire cable must be replaced. When carrying out repairs to the airbag wiring harness, you must use the spare parts offered in the out Electronic Parts Catalogue (EPC).
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
