OEM Restraints System Part Replacement Search
2025 BMW 8 SERIES
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
• Inspection, testing and installation work may only be carried out by expert trained personnel in BMW Service.• Work on components of the airbag system should only ever be carried out with the battery disconnected, the negative terminal post covered and the plug connection of the cable leading to the gas generator disconnected. If only the battery is disconnected, the following prescribed waiting period must be observed without fail:
1 minute.
• When carrying out straightening and welding work with an electric welder:
• Disconnect battery
• Cover negative terminal (post)
REV: 06/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Replace the following components after airbag deployment:• Steering wheel, if Driver airbag module Deployed
• Driver airbag module [AIRBAG,STEERING WHEEL; AIRBAG,KNEE BOLSTER], if Deployed
• Passenger airbag module [AIRBAG,INSTRUMENT PNL; AIRBAG,KNEE BOLSTER], if Deployed
• Dashboard trim panel, if Passenger airbag module deployed
• Replace airbag module and seat cover with upholstery [AIRBAG,FRONT SEAT], if Deployed
• Replace gas generator, active head restraint system, if deployed. If the severity of the crash has not caused any other damage to the seat, only the triggered gas generator needs to be replaced.
• Roof Airbag module [AIRBAG, ROOF], if Deployed
NOTE: Active head restraint: The gas generator can be replaced up to 5 times.
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Check and/or replace following components after airbag deployment:• Sensor B-pillar (left/right) [AIRBAG SENSOR,SIDE]
• Sensor front door (left/right) [AIRBAG SENSOR,FRT DOOR]
• Sensor seat, Driver-/passenger's side [AIRBAG SENSOR,PASS SEAT]
• Airbag control unit, vehicle interior [MODULE, AIRBAG CONTROL]
• Front sensor (engine compartment) [AIRBAG SENSOR,FRONT]
Cables and plugs:
• Check cables and plugs for damage, replace if necessary
Seat belt system:
• Electrically motorized reel
• Seat belt tensioner
• Seat belt height adjustment
• Anchor fitting tensioner
• Seat belt buckle
• Additional door lock: Check for foreign body, remove it if necessary.
Seats:
• Seat [AIRBAG,FRONT SEAT]
• Airbag module
• Active head restraint
Driver's airbag:
• Airbag module [AIRBAG,STEERING WHEEL]
• Steering Wheel
• Steering column
Front passenger airbag:
• Airbag module [AIRBAG,INSTRUMENT PNL]
• Dashboard trim panel (must be replaced!)
• Supporting tube (if damaged)
Side airbag, front/rear:
• Airbag module [AIRBAG SENSOR,FRT DOOR]
• Door trim panel
• Door in white
• Seat
Head airbag:
• Airbag module [AIRBAG, ROOF]
• A-pillar trim panel
• Roofliner
• Cover, B-pillar (if damaged)
• C-pillar trim panel (if damaged)
• Connection/mount (on side frame)
Knee airbag:
• Trim panel (driver's side)
• Lower section of glove box
• Knee protection(Driver• and passenger's side) [AIRBAG,KNEE BOLSTER]
Check components, replace if necessary
Passive knee protection
• Trim panel (driver's side)
• Glove compartment incl. knee protection (passenger's side)
Important!
Only repair those cables which show visible signs of damage. In the event of visible damage, make sure there is only one cable repair in effect after the repair work. If no visible damage can be identified, the entire cable must be replaced. When carrying out repairs to the airbag wiring harness, you must use the spare parts offered in the Electronic Parts Catalogue (EPC).
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
