OEM Restraints System Part Replacement Search
2024 Kia SPORTAGE
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Except when performing electrical inspections:1. Always turn the ignition switch OFF
2. Disconnect the negative cable from the battery
3. Wait at least 3 minutes before beginning work
REV : 12/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items:• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• Ignited seat Belt Pretensioner (BPT)
• SRS wiring harness
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Replace the clock spring if there is any problem after checking the clock spring for damage when the Driver Airbag (DAB) module is
deployed.
When the Side Airbag (SAB)/Curtain Airbag (CAB) module is deployed after a crash, replace the following components:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF; AIRBAG,FRONT SEAT BACK]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,QTR PANEL]
•SRS wiring harness
•Ignited seat Belt Pretensioner (BPT)
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Before doing any SRS repairs, use the KDS/GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.• Steering wheel and column
• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.
• After repairing the vehicle, check if the SRS operates normally.Turn IG ON. The airbag warning lamp should turns off after turning on for 3 • 6 seconds
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
