OEM Restraints System Part Replacement Search
2020 Kia Optima
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Before doing any SRS repairs, use the KDS/GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs.1. Turn ignition switch OFF
2. Disconnect the battery negative cable
3. Wait at least three minutes before beginning work
REV: 01/2020
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When the front airbag(s) deployed after a collision, replace the following items.• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,KNEE BOLSTER; AIRBAG,INSTRUMENT PNL]
• Seat belt pretensioner(s) [PRETENSIONER,FRT SEATBELT]
• Front impact sensors [AIRBAG SENSOR,FRONT]
• If the PAB has been deployed, replace the damaged crash pad.
When the side/curtain airbag(s) deployed after a collision, replace the following items.
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY; AIRBAG,ROOF
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.• Steering Wheel
• After the vehicle is completely repaired, confirm the SRS airbag system is OK
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
