OEM Restraints System Part Replacement Search
2020 Toyota Yaris Hatckback
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Before removing the air bag inflator or disconnecting the air bag inflator connector:1) Always switch the ignition off
2) Disconnect the negative battery cable
3) wait for 1 min or more to allow the backup power supply of the center airbag sensor assembly to deplete its stored power
REV: 03/2020
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Front Seat Side Airbag Assembly Handling:• After a side air bag has operated (deployed), always replace the front seat side airbag assembly and the seat back (pad, frame, trim) with new parts. [AIRBAG,FRONT SEAT BACK]
Center Airbag Sensor Assembly Handling:
• Once the air bags, pretensioner seat belts and lap pre-tensioner seat belts have operated (deployed) due to a collision or other causes, the center airbag sensor assembly must be replaced with a new one. [MODULE,AIRBAG CONTROL]
Front Airbag Sensor Handling:
• Once the air bags, pre-tensioner seat belts and lap pre-tensioner seat belts have operated (deployed) due to a collision or other causes, the front airbag sensor must be replaced with a new one. [AIRBAG SENSOR,FRONT]
Side Airbag Sensor (for Center Pillar) Handling:
• Once the air bag has operated (deployed) due to a collision or other causes, the side air bag sensor (for center pillar) must be replaced with a new one. [AIRBAG SENSOR,SIDE]
Side Airbag Sensor (for Front Door) Handling:
• Once the air bag has operated (deployed) due to a collision or other causes, the side air bag sensor (for front door) must be replaced with a new one. [AIRBAG SENSOR,FRT DOOR]
Curtain Shield Airbag Handling, this data was not included with the OE precautions documentation as of 03/15/2016:
[AIRBAG,ROOF]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Always use the on-board diagnostic function to diagnose the pre-tensioner seat belt and lap Pre-tensioner Seat Belt for malfunctions.Air bag inflator, Pre-tensioner Seat Belt, Lap re-tensioner Seat Belt Reuse:
• Before reusing a live (undeployed) air bag inflator, pre-tensioner seat belt or a lap pre-tensioner seat belt, always use the on-board diagnostic to diagnose the air bag inflator, pre-tensioner seat belt or a lap pre-tensioner seat belt to verify that they have no malfunction.
Air Bag Wiring Harness Repair:
• If a problem is found in the air bag wiring harness, always replace the wiring harness with a new one.
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.
