OEM Restraints System Part Replacement Search


2020 Kia TELLURIDE

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

(Always check service manual)
NO OEM GUIDELINES AVAILABLE AT THIS TIME

REV: 02/2023

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

Before starting the work related to the airbag, check the diagnosis trouble code (DTC) by using the (KDS), and perform the related work by
using the diagnosis trouble code (DTC) list.
1. When the front airbag(s) deployed after collision, replace the following components.
1) SRS Control Module (SRSCM)
2) Deployed airbag(s)
3) Front Impact Sensor
4) SRS wiring harness
5) When the driver airbag (DAB) module is deployed, damage to the clock spring is checked and replaced if there is an abnormality.
2. When the Side Airbag (SAB)/Curtain Airbag (CAB) module is deployed after a crash, replace the following components.
1) SRS Control Module (SRSCM)
2) Deployed airbag(s)
3) Side impact sensor(s) on the deployed side(s)
4) SRS wiring harness
3. After repairing the vehicle, check if the SRS operates normally.
1) Turn IG ON. The airbag warning lamp should turns off after turning on for 3 • 6 seconds

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

NO OEM GUIDELINES AVAILABLE AT THIS TIME

Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The following charts were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. To ensure that the most recent information is used, always refer to the vehicle maker's technical information before working with airbags and other passive restraint systems.


Related I-CAR Courses