Genesis ADAS

Advanced Driver Assistance Systems (ADAS) often require post-repair calibrations/aiming. There is also a wide variety of repair considerations depending on the year, make, and model of the vehicle being repaired. To assist you with understanding these considerations, we have gathered repair considerations based on make, into one easy to find location to assist you with complete, safe, and quality repair.

ADAS, Calibration, and Scanning Article Hotspot

Posted on 14 January 2019

Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.

Continue Reading...


asTech Publishes Four Tips to Read and Understand OBD-II Codes

Posted on 12 December 2018

This highly visible malfunction indicator lamp (MIL), also known as a check engine light, can be set off for a variety of reasons related to electrical problems, mechanical issues, and even after a crash. Scan tools can usually pick up the diagnostic trouble codes (DTC) to assist in figuring out where the issue lies so it can be fixed, but this is not always a guaranteed way to find the problem. Some issues, such as flaws in calibration, will not trigger the check engine light or report any diagnostic trouble codes.

Continue Reading...


2018 SEMA: I-CAR ADAS Panel Discussion

Posted on 31 October 2018

Tuesday at SEMA, I-CAR held a panel discussion on advanced driver assistance systems (ADAS) and real-world collision challenges. The panel was headed by Jason Bartanen (Industry Technical Relations Director, I-CAR), Jake Rodenroth (Director of Industry Relations, asTech), and Jason Zeise (Mechanical Operations Manager, LaMettry's Collision, Inc.).

Continue Reading...


Collision Repair New Video: ADAS Calibrations Require Precision

Posted on 21 September 2018

Abraham Lincoln once said, “Don't believe everything you see on the internet….” While that statement is only partially true, it is an unfortunate reality for some recent advanced driver assistance systems (ADAS) calibration ‘procedures’ we’ve seen. Some of the procedures will allow the system to calibrate, however, there is a dangerous consequence to relying on a YouTube video to calibrate a system; it likely won’t result in a complete, safe, quality repair.

Continue Reading...


What Does Installation Mean?

Posted on 27 July 2018

You may have noticed that there are many cameras/sensors, that according to the OEM Calibration Requirements Search, require calibration if installed. This statement has brought up questions from the collision industry. What does it mean to install something? If the tailgate that houses the 360° camera is installed, even though the camera wasn’t removed from the tailgate, does that qualify as the camera being installed? Let’s take a look at how to interpret this information.

Continue Reading...


When ADAS Can't See

Posted on 31 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. We wrote a series of articles about the different systems and how repair operations could affect the various cameras and sensors. Let’s take a look at some common things or materials that can interfere with ADAS.

Continue Reading...


When ADAS Can't See: Collision Warning and Braking System

Posted on 26 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the collision warning/braking system.

Continue Reading...


When ADAS Can't See: Adaptive Cruise Control System

Posted on 18 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the adaptive cruise control (ACC) system.

Continue Reading...


When ADAS Can't See: Front/Rear Cross Traffic Systems

Posted on 8 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair, may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the front/rear cross traffic system.

Continue Reading...


When ADAS Can't See: Lane Departure Warning/Lane Keep Assist System

Posted on 3 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the lane departure warning/lane keep assist (LDW/LKA) systems.

Continue Reading...


When ADAS Can't See: Blind Spot Monitoring System

Posted on 22 December 2017

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the blind spot detection system (BSD).

Continue Reading...


When ADAS Can't See: Parking Assist System

Posted on 29 November 2017

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the parking assist system.

Continue Reading...


Understanding Advanced Driver Assistance Systems

Posted on 27 October 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at what we learned with this series of articles.

Continue Reading...


Understanding the Lane Departure Warning/Lane Keep Assist Systems

Posted on 19 October 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of lane departure warning/lane keep assist (LDW/LKA) systems.

Continue Reading...


Understanding the Front/Rear Cross Traffic Systems

Posted on 5 October 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a front/rear cross traffic system.

Continue Reading...


Understanding the Blind Spot Detection System

Posted on 29 September 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a blind spot detection system.

Continue Reading...


Typical Calibration Requirements

Posted on 28 September 2017

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at what we learned in this series.

Continue Reading...


Understanding the 360° Camera View System

Posted on 6 September 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a 360° camera view system.

Continue Reading...


Understanding the Collision Warning and Braking System

Posted on 31 August 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a collision warning and collision braking system.

Continue Reading...


Understanding the Adaptive Cruise Control System

Posted on 25 August 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of an adaptive cruise control system (ACC).

Continue Reading...


Understanding the Park Assist System

Posted on 11 August 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a park assist system.

Continue Reading...


Typical Calibration Requirements for Steering Angle/Position Sensors

Posted on 9 November 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at steering angle/position sensors.

Continue Reading...


Typical Calibration Requirements for Park Assist Sensors

Posted on 31 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at park assist sensors.

Continue Reading...


Typical Calibration Requirements for Adaptive Lighting

Posted on 26 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at adaptive lighting systems.

Continue Reading...


Typical Calibration Requirements for Blind Spot Sensors

Posted on 19 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at blind spot sensors.

Continue Reading...


Typical Calibration Requirements for Forward Radar Sensors

Posted on 12 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at forward radar sensors.

Continue Reading...


Typical Calibration Requirements for 360° Camera View

Posted on 5 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at 360° Camera View systems.

Continue Reading...


I-CAR Best Practice: Collision Repair Diagnostics Definitions

Posted on 3 October 2016

Periodically, I-CAR Repairability Summits are held to bring together collision industry stakeholders and subject matter experts to develop collision repair processes and best practices for repair of late-model, collision damaged vehicles. In the I-CAR Repairability Summit the topic of collision repair diagnostics definitions was discussed.

Continue Reading...


Typical Calibration Requirements for Forward Facing Cameras

Posted on 28 September 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at forward facing cameras (FFCs).

Continue Reading...