OEM Hybrid And Electric Vehicle Disable Search

2014 Nissan LEAF


Click the links below for OEM repair information. (Note: additional purchase is required for a subscription to each OEM's repair information website.)

Yes No Not Identified
Scan Tool Required X
HV DVOM Required X

Accessing Disable Procedure

To find the Nissan High-Voltage Disable Procedures:

  1. Go to www.nissan-techinfo.com
  2. Click United States
  3. Enter username and password (lower left of page)
  4. Click Submit
  5. Click View Nissan Publications (upper left webpage)
  6. From the dropdown menu, select Service Manual, Model, and Year (right side of the webpage)
  7. Click Search (upper right corner)
  8. Click the Eye icon by the hybrid service manual (right side of the webpage)
  9. Click A: General Information (left Menu)
  10. Click GI - General Information (underneath the general information category)
  11. Click Precaution (left Menu)
  12. Click Cautions as to High-Voltage (left Menu)
  13. Click How to Disconnect High-Voltage (left Menu)
  14. Click High-Voltage Shut-Off Procedure (left Menu)

Hybrid And Electric Vehicle Welding Best Practices

When welding on an HEV or EV, follow the same precautions as when welding on a conventional vehicle. In addition, there are precautions to take with the high-voltage battery. As a best practice, disconnect both the 12 V battery and the high-voltage battery service disconnect. (Note: Always disable the high-voltage battery following the vehicle makers repair information and follow all safety precautions.)

Refinish Precautions

"While using painting booth, trunk room temperature must not exceed 60°C (140°F) to prevent deterioration of li-ion battery. NOTE: If trunk room temperature becomes more than 60°C (140°F), paint booth must be shut off immediately."

Additional Information

* This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently for the most up-to-date information. The following OEM specific repair information was identified from the vehicle makers’ repair information. The contents are based on the information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information when disabling and working on hybrid and electric vehicles.

Related I-CAR Courses