OEM Restraints System Part Replacement Search
2007 Porsche 911 Turbo/GT2
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Remove ignition key.2. Disconnect and cover the negative terminal of the battery.
3. Wait 1 minute.
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
For a front airbag deployment:• Deployed airbag units
• Belt tensioner units
• Contact unit
• Passenger airbag triggering unit after the third time the airbag is triggered
• Any damaged restraint system part
For a side airbag deployment:
• Side airbag unit
• Sensor for the side airbag unit after the third time the side airbag is triggered
• Any damaged restraint system part
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
For a front airbag deployment:• Seat belt system
• Any restraint system part or wiring identified by diagnostic check
For a side airbag deployment:
• Seat belt system
• Any restraint system part or wiring identified by diagnostic check
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
