OEM Restraints System Part Replacement Search
2007 Suzuki Forenza Sedan/Wagon
Share:
|
Print
Print
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn the steering wheel to the straight-ahead position.2. Turn ignition switch to "LOCK" and remove the key.
3. Remove the airbag fuse F1 in the instrument panel fuse block and wait more than one minute for SIR capacitor to discharge.
NOTE:
With "AIR BAG" fuse removed and ignition switch ON, "AIR BAG" warning lamp will be ON. This is normal operation and does not indicate an air bag system malfunction.
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
With a front airbag deployment:• Front airbag modules
• Sensing and diagnostic module (SDM)
• Pretensioners
• SIR wiring
• Clock spring
• Any damaged restraint system part
With a side airbag deployment:
• Side airbag modules
• Sensing and diagnostic module (SDM)
• Pretensioners
• SIR wiring
• Any damaged restraint system part
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• A dimensional inspection of the steering column• Knee bolsters and mounting points
• Instrument panel and steering column reinforcement plate
• Instrument panel braces
• Seat belts and mounting points
• All airbag components mounting points
• Any restraint system part or wiring identified by diagnostic check
*This matrix does not currently contain all production vehicles sold in the United States. The contents were developed in cooperation with AudaExplore, a Solera company. The contents are based on the information available at the time of publication. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information.
