Fiat ADAS

Advanced driver assistance systems (ADAS) often require post-repair calibrations. There are also a wide variety of repair considerations depending on the vehicle being repaired. We regularly publish OEM-specific Collision Repair News articles focused on ADAS. We’ve gathered these articles, based on make, to assist you with complete, safe, and quality repairs.

FCA/Stellantis: Bumper Cover Removal With Active Air Dams

Posted on 7 October 2022

Some FCA/Stellantis vehicles use active air dams underneath the front bumper cover to improve the aerodynamics of the vehicle. With active air dams, comes some considerations when removing and installing a front bumper cover. Let’s take a look at what FCA/Stellantis has to say.

Continue Reading...


Locating OEM-Approved ADAS Tools: FCA/Stellantis

Posted on 2 December 2021

When researching calibration procedures for advanced driver assistance systems (ADAS), you may notice that many of the procedures require the use of specific tools. Some tools may be everyday items like string, tape, levels, paper, etc. However, many of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.

Continue Reading...


FCA/Stellantis ADAS Repair Planning: Do You Have All The Information?

Posted on 22 September 2020

While researching body repair manuals (BRM) and service manuals, we're creating OEM-specific articles for additional information needed when repair planning. The goal of these articles is to help repairers create a more complete and accurate repair plan. One key aspect of repair planning is being aware of the advanced driver assistance systems (ADAS) equipped on the vehicle. Let’s take a closer look at FCA/Stellantis.

Continue Reading...


FCA/Stellantis Has Video Procedures

Posted on 14 May 2020

Looking for more information about a specific repair procedure? Some OEMs are now providing videos within the repair procedures on their service site. Vehicle makers may also have additional websites that contain repair videos. As we research OEM websites and find these helpful videos, we will write articles to let you know. Let’s take a closer look at FCA/Stellantis.

Continue Reading...


Identifying FCA/Stellantis Programming Differences

Posted on 18 December 2019

While doing research on FCA/Stellantis for the RTS OEM Calibration Requirements Search, the RTS team noticed on some of the ADAS, there is a procedure called a “PROXI alignment”. We have researched what this means in order to give you clarity, in the event you see this procedure mentioned in the service manual.

Continue Reading...


OEM Linking Pin: Refinishing Park Assist Sensors - FCA/Stellantis

Posted on 25 September 2019

As part of the I-CAR Repairability Technical Support (RTS) OEM linking pin activity, we are helping to connect the collision repair industry to the vehicle makers. Recently we had a technical inquiry that asked if FCA/Stellantis allows park assist sensors to be refinished.

Continue Reading...


ADAS, Calibration, And Scanning Article Hotspot

Posted on 14 January 2019

Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.

Continue Reading...


Where Do I Find Other Types Of Information In FCA/Stellantis?

Posted on 20 June 2018

Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, "What needs to be inspected after a supplemental restraints system (SRS) deployment?", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the FCA/Stellantis website.

Continue Reading...


Locating ADAS Information: FCA/Stellantis

Posted on 24 May 2018

As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.

Continue Reading...


Additional Calibration Requirements: FCA/Stellantis

Posted on 11 May 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

It does not include occupant classification systems (OCS), steering angle sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at what additional items may require calibrations/initializations on FCA/Stellantis vehicles.

Continue Reading...


FCA/Stellantis Glass Replacement Requirements

Posted on 23 August 2016

The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.

Continue Reading...


FCA/Stellantis Position Statement: Pre- and Post-Repair System Scanning

Posted on 9 June 2016

FCA/Stellantis has released a position statement related to pre- and post-repair system scanning.

Continue Reading...