OEM Hybrid And Electric Vehicle Disable Search

Click the links below for OEM repair information. (Note: additional purchase is required for a subscription to each OEM's repair information website.)

---

	Yes	No	Not Identified
Scan Tool Required			X
HV DVOM Required	X

Accessing Disable Procedure

To find the Mitsubishi High-Voltage Disable Procedures:

1. Go to mitsubishitechinfo.com
2. Enter username and password (top left of webpage)
3. Click Submit
4. Open Google Authenticator app
5. Enter Code in 2FA Verifcation Code box
6. Click Continue
7. Click Service Information (top of webpage)
8. Click Click Here (middle of webpage)
• Note: Next to To Begin A Service Information Search
9. Enter vehicle:
• option 1: VIN
1. Enter VIN
2. Click Go
• option 2: Manual entry
1. Select Model Year, Model Name, Engine, and Transmission from dropdowns
10. Click Service Manual (middle of webpage)
11. Click Click Here To View The Table Of Contents For The Service Manual
12. Click Arrow for General Information
13. Click Arrow for Precautions
14. Click Precautions On How to Use The High-Voltage Vehicle

Hybrid And Electric Vehicle Welding Best Practices

When welding on a hybrid vehicle or electric vehicle, follow the same precautions as when welding on a conventional vehicle. In addition, there are precautions to take with the high-voltage battery. As a best practice, disconnect both the 12 V battery and the high-voltage battery service disconnect. (Note: Always disable the high-voltage battery following the vehicle makers repair information and follow all safety precautions.)

Refinish Precautions

Caution:

• Before using the painting booth, in principle, remove the drive battery.
• Do not heat the main battery to 60°C (140°F)* or higher. (Due to rapid deterioration)
• Even when using a panel heater or spot heater, remove the main battery if the drive battery temperature may become 60°C (140°F) or higher

Note:

*: As a guideline, the drive battery temperature will be kept at 60°C (140°F) or lower with the booth work that satisfies all the following three items.

• Temperature inside the factory is 30° C (86°F) or lower.
• Painting booth temperature is set at 70°C (158°F) or lower.
• Drying time is within 60 minutes.