OEM Hybrid And Electric Vehicle Disable Search
2019 Fiat 500e
Print
Click the links below for OEM repair information. (Note: additional purchase is required for a subscription to each OEM's repair information website.)
| Yes | No | Not Identified | |
| Scan Tool Required | X | ||
| HV DVOM Required | X |
Accessing Disable Procedure
To find the FCA/Stellantis High-Voltage Disable Procedures:
- Go to stellantisiop.com
- Enter username and password
- Click Login
- Go to Select Brand, click vehicle emblem
- Click Launch (in popup box)
- Enter vehicle
- option 1: Enter VIN (top of webpage)
- option 2: Select Year, Model, and Engine from dropdowns (top of webpage)
- option 3: Click vehicle emblems to Select Brand, Select Model, and Select Year & Engine (middle of webpage)
- Click Collision Info (left side of webpage)
- Click 31-Collision Information
- Click Standard Procedures - BEV
- Click High-Voltage Power Down Procedure
Hybrid And Electric Vehicle Welding Best Practices
Before cutting or welding within 30 cm (12 inches) of the HVB or any high-voltage component or wiring, the concerned components must be removed to prevent heat damage.
Refinish Precautions
"When a paint booth bake cycle is used at the body shop, be certain the maximum temperature of the bake cycle does not exceed 74°C (165°F) and must be for no longer than a 1 hour maximum. If the paint booth temperature is more than 74°C (165°F) have the Li-ion Battery removed from the vehicle by the certified Electric Vehicle dealer and then deliver the vehicle to body shop. Failure to remove the Li-ion Battery prior to subjecting it to temperatures above 74°C (165°F) could result in Li-ion Battery damage and shorter life. It is highly recommended that a non-conductive heat shield is placed on the battery pack to protect against potential heat, structural integrity or electrical damage." (surface temperature)
| Additional Information |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, OEM Emergency Response Guides, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process. Refinish Precautions ambient or surface temperature disclosures were verified through the I-CAR OEM Linking Pin process.
