Volkswagen ADAS

Advanced Driver Assistance Systems (ADAS) often require post-repair calibrations/aiming. There is also a wide variety of repair considerations depending on the year, make, and model of the vehicle being repaired. To assist you with understanding these considerations, we have gathered repair considerations based on make, into one easy to find location to assist you with complete, safe, and quality repair.

Bumper Cover Repair With ADAS: Volkswagen

Posted on 5 April 2019

A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly, normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does Volkswagen say on the subject?

Continue Reading...


Volkswagen Position: Pre- and Post-Repair System Scanning

Posted on 27 March 2019

We often receive the Ask I-CAR inquiries: "Does Volkswagen have a position statement on pre- and post-repair system scanning? Do they plan on coming out with one?"

Continue Reading...


ADAS, Calibration, and Scanning Article Hotspot

Posted on 14 January 2019

Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.

Continue Reading...


Pre- and Post-Repair System Scanning Position Statements

Posted on 9 January 2019

Are you wondering if a particular OEM or organization has a published position statement on pre-repair and post-repair scanning? We have compiled a list of most of the position statements on the subject, so you can easily find the particular statement you are looking for. The following articles give you a brief summary of the position statement along with a link to the full statement.

Continue Reading...


asTech Publishes Four Tips to Read and Understand OBD-II Codes

Posted on 12 December 2018

This highly visible malfunction indicator lamp (MIL), also known as a check engine light, can be set off for a variety of reasons related to electrical problems, mechanical issues, and even after a crash. Scan tools can usually pick up the diagnostic trouble codes (DTC) to assist in figuring out where the issue lies so it can be fixed, but this is not always a guaranteed way to find the problem. Some issues, such as flaws in calibration, will not trigger the check engine light or report any diagnostic trouble codes.

Continue Reading...


I-CAR 360: 2018 Volkswagen Atlas Video Now Available

Posted on 26 November 2018

The I-CAR Repairability Technical Support (RTS) team recently developed a new I-CAR 360° video on the 2018 Volkswagen Atlas. The video provides a 360° tour around the Atlas. Let’s take a look.

Continue Reading...


Locating ADAS Information

Posted on 21 November 2018

As a collision repair technician, it may seem like all the necessary information you would need would be located in the service manual, but this is not the case for modern vehicles. Sometimes the information for a complete repair can be housed in multiple manuals. Fortunately, The Repairability Technical Support Portal (RTS) has videos on how to navigate each OEM website.

Continue Reading...


2018 SEMA: I-CAR ADAS Panel Discussion

Posted on 31 October 2018

Tuesday at SEMA, I-CAR held a panel discussion on advanced driver assistance systems (ADAS) and real-world collision challenges. The panel was headed by Jason Bartanen (Industry Technical Relations Director, I-CAR), Jake Rodenroth (Director of Industry Relations, asTech), and Jason Zeise (Mechanical Operations Manager, LaMettry's Collision, Inc.).

Continue Reading...


Challenges Ahead: Keeping Pace With Rapid Advances In Collision Repair

Posted on 11 October 2018

As the automotive industry moves deeper into the mobility arena, it also enters a more challenging realm for the collision repair industry.

The wide array of Advanced Driver Assistance Systems (ADAS) that provide active safety measures for vehicle occupants are powered by an electronic communication network that requires near-perfect accuracy when repaired after a collision.

Continue Reading...


Collision Repair New Video: ADAS Calibrations Require Precision

Posted on 21 September 2018

Abraham Lincoln once said, “Don't believe everything you see on the internet….” While that statement is only partially true, it is an unfortunate reality for some recent advanced driver assistance systems (ADAS) calibration ‘procedures’ we’ve seen. Some of the procedures will allow the system to calibrate, however, there is a dangerous consequence to relying on a YouTube video to calibrate a system; it likely won’t result in a complete, safe, quality repair.

Continue Reading...


Locating ADAS Information: Volkswagen

Posted on 14 September 2018

As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.

Continue Reading...


What Does Installation Mean?

Posted on 27 July 2018

You may have noticed that there are many cameras/sensors, that according to the OEM Calibration Requirements Search, require calibration if installed. This statement has brought up questions from the collision industry. What does it mean to install something? If the tailgate that houses the 360° camera is installed, even though the camera wasn’t removed from the tailgate, does that qualify as the camera being installed? Let’s take a look at how to interpret this information.

Continue Reading...


Where Do I Find Other Types of Information in Volkswagen?

Posted on 18 April 2018

Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as "what needs to be inspected after a supplemental restraint system (SRS) deployment" or "does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the Volkswagen website.

Continue Reading...


When ADAS Can't See

Posted on 31 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. We wrote a series of articles about the different systems and how repair operations could affect the various cameras and sensors. Let’s take a look at some common things or materials that can interfere with ADAS.

Continue Reading...


When ADAS Can't See: Collision Warning and Braking System

Posted on 26 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the collision warning/braking system.

Continue Reading...


When ADAS Can't See: Adaptive Cruise Control System

Posted on 18 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the adaptive cruise control (ACC) system.

Continue Reading...


When ADAS Can't See: Front/Rear Cross Traffic Systems

Posted on 8 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair, may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the front/rear cross traffic system.

Continue Reading...


When ADAS Can't See: Lane Departure Warning/Lane Keep Assist System

Posted on 3 January 2018

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the lane departure warning/lane keep assist (LDW/LKA) systems.

Continue Reading...


When ADAS Can't See: Blind Spot Monitoring System

Posted on 22 December 2017

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the blind spot detection system (BSD).

Continue Reading...


When ADAS Can't See: Parking Assist System

Posted on 29 November 2017

Collision repairs on vehicles equipped with Advanced Driver Assistance Systems (ADAS) can have more restrictions than vehicles without ADAS. Items that historically would be a simple repair may now need to be replaced. The ADAS needs to be able to see/sense in some way, whether it be by radar, camera-view, ultrasonic, etc. Repairers need to keep sensor/camera field of vision clear to avoid system malfunctions. For example, repair material that would normally be used to repair a gouge in a bumper cover is now a problem because it can block the sensor’s field of vision and may not allow the sensor to function properly.

Some OEMs have warnings against making repairs in front of sensors/cameras or a certain distance from the sensors/cameras. However, many times there is also a list of other items that can block the sensor/camera view. Let’s take a look at some common things or materials that can interfere with the parking assist system.

Continue Reading...


Understanding Advanced Driver Assistance Systems

Posted on 27 October 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at what we learned with this series of articles.

Continue Reading...


Understanding the Lane Departure Warning/Lane Keep Assist Systems

Posted on 19 October 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of lane departure warning/lane keep assist (LDW/LKA) systems.

Continue Reading...


Understanding the Front/Rear Cross Traffic Systems

Posted on 5 October 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a front/rear cross traffic system.

Continue Reading...


Understanding the Blind Spot Detection System

Posted on 29 September 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a blind spot detection system.

Continue Reading...


Typical Calibration Requirements

Posted on 28 September 2017

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at what we learned in this series.

Continue Reading...


Additional Calibration Requirements

Posted on 22 September 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with Advance Driver Assistance Systems (ADAS). This includes systems such as Adaptive Cruise Control, Lane Keep Assist, and Collision Braking.

It does not include Occupant Classification Systems (OCS), Steering Angle Sensors, battery disconnects, or other calibrations/initializations required, when not related directly to ADAS. Let’s take a look at we have found for additional calibration requirements.

Continue Reading...


Understanding the 360° Camera View System

Posted on 6 September 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a 360° camera view system.

Continue Reading...


Understanding the Collision Warning and Braking System

Posted on 31 August 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a collision warning and collision braking system.

Continue Reading...


Understanding the Adaptive Cruise Control System

Posted on 25 August 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of an adaptive cruise control system (ACC).

Continue Reading...


Understanding the Park Assist System

Posted on 11 August 2017

A key part of being able to diagnose a problem with Advanced Driver Assistance Systems (ADAS) is understanding how the system works. Knowing what is happening inside the system will help you properly diagnose why the system may be failing. This will prevent replacing parts that are not causing the system issue. Let’s take a look at the inner workings of a park assist system.

Continue Reading...


I-CAR Best Practice: Damage Analysis for ADAS Identification and Calibration Requirements

Posted on 29 June 2017

Periodically, I-CAR Repairability Summits are held to bring together collision industry stakeholders and subject matter experts to develop collision repair processes and best practices for repair of late-model, collision damaged vehicles. In the I-CAR Repairability Summit the topic of damage analysis for advanced driver assistance systems (ADAS) identification and calibration requirements was discussed.

Continue Reading...


Additional Calibration Requirements: Volkswagen

Posted on 16 May 2017

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advance driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

Continue Reading...


Battery Disconnect Considerations

Posted on 21 February 2017

When a damaged vehicle enters a collision repair facility, many times the repairs require the battery to be disconnected. Operations such as welding, SRS repairs, engine work, and body panels being open for extended periods of time, can all require that the battery be disconnected. At one time the radio presets would be written down before the battery was disconnected and programmed after the battery was reconnected. However, today many OEMs have special precautions or steps that need to be taken when disconnecting the battery. Let’s take a look at what some OEMs require when disconnecting the battery.

Continue Reading...


Typical Calibration Requirements for Steering Angle/Position Sensors

Posted on 9 November 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at steering angle/position sensors.

Continue Reading...


Typical Calibration Requirements for Park Assist Sensors

Posted on 31 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at park assist sensors.

Continue Reading...


Typical Calibration Requirements for Adaptive Lighting

Posted on 26 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at adaptive lighting systems.

Continue Reading...


Typical Calibration Requirements for Blind Spot Sensors

Posted on 19 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at blind spot sensors.

Continue Reading...


Typical Calibration Requirements for Forward Radar Sensors

Posted on 12 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at forward radar sensors.

Continue Reading...


Typical Calibration Requirements for 360° Camera View

Posted on 5 October 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at 360° Camera View systems.

Continue Reading...


I-CAR Best Practice: Collision Repair Diagnostics Definitions

Posted on 3 October 2016

Periodically, I-CAR Repairability Summits are held to bring together collision industry stakeholders and subject matter experts to develop collision repair processes and best practices for repair of late-model, collision damaged vehicles. In the I-CAR Repairability Summit the topic of collision repair diagnostics definitions was discussed.

Continue Reading...


Typical Calibration Requirements for Forward Facing Cameras

Posted on 28 September 2016

Technicians should be aware of what’s required to keep advanced driver assistance systems (ADAS) running safely after a collision. Whether that be aiming a camera, which can cause a system to not function as intended, or checking for diagnostic trouble codes (DTCs). For a basic understanding of what’s required, we’ve put together a series of articles that provide general information on what’s required to repair the system after a collision. Let’s take a look at forward facing cameras (FFCs).

Continue Reading...


Volkswagen Glass Replacement Requirements

Posted on 16 September 2016

The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.

It is commonly asked; what is required when replacing a windshield? With this question in mind, we will be presenting a series of articles that highlight some of the requirements from various OEMs. Let’s see what Volkswagen has to say.

Continue Reading...


Making Automatic Emergency Braking (AEB) A Standard Feature

Posted on 24 September 2015

A group of vehicle makers got together recently and discussed the future of automatic emergency braking (AEB) technology in their vehicles. This feature is designed to reduce the severity and frequency of collisions; but no matter how good it is, it will never prevent all accidents from happening. So what do you need to know in order to repair vehicles with AEB, and how do you know the system is functioning properly?

Continue Reading...