Tesla ADAS

Advanced driver assistance systems (ADAS) often require post-repair calibrations. There are also a wide variety of repair considerations depending on the vehicle being repaired. We regularly publish OEM-specific Collision Repair News articles focused on ADAS. We’ve gathered these articles, based on make, to assist you with complete, safe, and quality repairs.

Tesla Position: Pre- and Post-Repair System Scanning - UPDATE

Posted on 7 June 2024

We often receive the Ask I-CAR inquiry: "Does Tesla have a position statement on pre- and post-repair system scanning? Do they plan on coming out with one?"

Continue Reading...


Non-SRS Wiring Repairs: Tesla - UPDATE

Posted on 25 July 2022

What is a non-SRS wiring repair? It is the repairing of an electrical component that is not part of the supplemental restraints system circuit (usually identified by yellow wire looms). As technology increases on vehicles, so does the number of components that utilize electricity. Many of the sensors and modules are becoming smarter and more sensitive. If the wire is too long, the wrong gauge, or spliced in the wrong location, it can cause malfunctions in the components that it’s powering. Many OEMs have different restrictions and guidelines for repairing wiring that does not control SRS components. On the other hand, there are OEMs that don’t allow wiring repairs at all, so full harness replacement is the only option.

Continue Reading...


Refinishing Park Assist Sensors: Tesla

Posted on 15 June 2022

Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require painting to match the vehicle. Vehicle makers often provide information on the painting of new sensors. Some vehicle makers do not recommend refinishing sensors with minor finish damage because excessive paint thickness may adversely affect the operation of the park assist system. However, other vehicle makers allow refinishing and provide guidelines. Let’s see what Tesla has to say.

Continue Reading...


Additional Calibration Requirements: Tesla

Posted on 10 November 2020

The addition of the OEM Calibration Requirements Search to the RTS portal was a big step for the collision industry. While this new feature has been well received, there has been some confusion about what is included in the search tool. The OEM Calibration Requirements Search is designed to provide information on the calibration requirements that are needed for vehicles equipped with advanced driver assistance systems (ADAS). This includes systems such as adaptive cruise control, lane keep assist, and collision braking.

Continue Reading...


Bumper Cover Repair With ADAS: Tesla

Posted on 28 April 2020

A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly, normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does Tesla say on the subject?

Continue Reading...


Where Do I Find Other Types Of Information In Tesla?

Posted on 9 April 2020

Navigating OEM websites can be challenging when searching for collision repair procedures, especially as no two OEM websites are alike. What happens when you need to find other types of repair information, such as, "What needs to be inspected after a supplemental restraints system (SRS) deployment?", or "Does the tire pressure monitoring system (TPMS) require a scan tool or specialty tool?" Let's take a closer look at the Tesla website.

Continue Reading...


ADAS, Calibration, And Scanning Article Hotspot

Posted on 14 January 2019

Since advanced driver assistance systems (ADAS), scanning, and calibration first started becoming relevant, members of the collision repair industry have required as much knowledge as possible on these subjects. I-CAR’s Repairability Technical Support (RTS) team continues to be on the leading edge of research and education. Our goal is to help communicate information to the industry, and a great way to do this is through Collision Repair News articles.

Continue Reading...


Locating ADAS Information: Tesla

Posted on 16 October 2018

As a collision repair technician, there is one part of a service manual that houses all of the information you would ever need…right? This is not the case with modern vehicles. You may be required to look in numerous manuals to find the information required to safely repair the vehicle.

Continue Reading...


Tesla Glass Replacement Requirements

Posted on 10 November 2017

The role of the windshield is a lot more complex than simply allowing a view of the road ahead. It is considered a structural part of the vehicle as it contributes to the strength of the roof and A-pillars. The windshield helps to manage collision energy and has become an integral part of several advanced safety systems.

It is commonly asked, "What is required when replacing a windshield?" With this question in mind, we will be presenting a series of articles that highlight some of the requirements from the various OEMs. As always, it is important to read through each vehicle-specific procedure to ensure a complete, safe, and quality repair.

Continue Reading...


Making Automatic Emergency Braking (AEB) A Standard Feature

Posted on 24 September 2015

A group of vehicle makers got together recently and discussed the future of automatic emergency braking (AEB) technology in their vehicles. This feature is designed to reduce the severity and frequency of collisions; but no matter how good it is, it will never prevent all accidents from happening. So what do you need to know in order to repair vehicles with AEB, and how do you know the system is functioning properly?

Continue Reading...