OEM Calibration Requirements Search


2019 Lincoln Navigator

Print

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.


Vehicle System Options

360° Camera View

360 Degree View Camera
Cameras/Sensors:
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
Camera in Front Bumper Cover/Grille (Middle)
Camera in Side Mirror (Left)
Camera in Side Mirror (Right)
Yes No Not Identified
DTCs Set X
System MIL X



Active Park Assist

Active Park Assist
Cameras/Sensors:
Sensor(s) in Front Bumper Cover/Grille (Sides)
Sensor(s) in Rear Bumper Cover (Sides)
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Cruise Control

Cruise Control with Adaptive Cruise Control
Cameras/Sensors:
Sensor(s) Behind Front Bumper Cover/Grille
Yes No Not Identified
DTCs Set X
System MIL X



Collision Warning

Collision Warning
Cameras/Sensors:
Camera Near Rearview Mirror
Sensor(s) Behind Front Bumper Cover/Grille
Yes No Not Identified
DTCs Set X
System MIL X



Collision Braking

Collision Avoidance System
Cameras/Sensors:
Camera Near Rearview Mirror
Sensor(s) Behind Front Bumper Cover/Grille
Yes No Not Identified
DTCs Set X
System MIL X



Blind Spot Detection

BLIS
Cameras/Sensors:
Sensor(s) Behind Rear Bumper Cover (Sides)
Yes No Not Identified
DTCs Set X
System MIL X



Lane Departure Warning

Lane Keeping Alert
Cameras/Sensors:
Camera Near Rearview Mirror
Yes No Not Identified
DTCs Set X
System MIL X



Lane Keep Assist

Lane Keep Aid
Cameras/Sensors:
Camera Near Rearview Mirror
Yes No Not Identified
DTCs Set X
System MIL X



Rear View

Parking Aid Camera
Cameras/Sensors:
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
Yes No Not Identified
DTCs Set X
System MIL X



Park Assist

Parking Aid
Cameras/Sensors:
Sensor(s) in Front Bumper Cover/Grille
Sensor(s) in Rear Bumper Cover
Yes No Not Identified
DTCs Set X
System MIL X



Rear Cross Traffic

Cross Traffic
Cameras/Sensors:
Sensor(s) Behind Rear Bumper Cover (Sides)
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Lighting 1

Automatic High Beams
Cameras/Sensors:
Camera Near Rearview Mirror
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Lighting 2

Adaptive Front Lighting
Cameras/Sensors:
Sensor(s) in Additional Location(s)
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Lighting 3

Automatic Headlamp Leveling
Cameras/Sensors:
Sensor(s) in Additional Location(s) (Middle)
Yes No Not Identified
DTCs Set X
System MIL X




Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)

OEM Name: Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If battery is disconnected or discharged
  • If camera is replaced
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

Rear View


Camera in Deck Lid/Liftgate/Tailgate (With 360° View)

OEM Name: Rear Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If front parking aid camera is removed
  • If rear parking aid camera is removed
  • If side parking camera is removed
Camera in Deck Lid/Liftgate/Tailgate (With 360° View) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
"On vehicles equipped with trailer reverse guidance (TRG), this procedure also perform the trailer reverse guidance camera alignment."


Systems Affected:

360° Camera View


Camera in Front Bumper Cover/Grille (Middle)

OEM Name: Front Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If front parking aid camera is removed
  • If rear parking aid camera is removed
  • If side parking camera is removed
Camera in Front Bumper Cover/Grille (Middle) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
"On vehicles equipped with trailer reverse guidance (TRG), this procedure also perform the trailer reverse guidance camera alignment."


Systems Affected:

360° Camera View


Camera in Side Mirror (Left)

OEM Name: Side Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If front parking aid camera is removed
  • If rear parking aid camera is removed
  • If side parking camera is removed
Camera in Side Mirror (Left) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
"On vehicles equipped with trailer reverse guidance (TRG), this procedure also perform the trailer reverse guidance camera alignment."


Systems Affected:

360° Camera View


Camera in Side Mirror (Right)

OEM Name: Side Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If front parking aid camera is removed
  • If rear parking aid camera is removed
  • If side parking camera is removed
Camera in Side Mirror (Right) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
"On vehicles equipped with trailer reverse guidance (TRG), this procedure also perform the trailer reverse guidance camera alignment."


Systems Affected:

360° Camera View


Camera Near Rearview Mirror

OEM Name: Image Processing Module A

Calibration/Initialization Requirement Events:

  • If front air bag is deployed
  • If interior mirror is replaced
  • If suspension is repaired or aligned
  • If there is a change in the tire size
  • If windshield is replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the camera with a new one, data will typically need to be transferred from existing camera.


Systems Affected:

Collision Warning Collision Braking Lane Departure Warning Lane Keep Assist Adaptive Lighting 1


Sensor(s) Behind Front Bumper Cover/Grille

OEM Name: Cruise Control Module

Calibration/Initialization Requirement Events:

  • If sensor is removed
Sensor(s) Behind Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.


Systems Affected:

Adaptive Cruise Control Collision Warning Collision Braking


Sensor(s) Behind Rear Bumper Cover (Sides)

OEM Name: Side Obstacle Detection Control Module

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.


Systems Affected:

Blind Spot Detection Rear Cross Traffic


Sensor(s) in Additional Location(s)

OEM Name: (multiple inputs)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Additional Location(s) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Receives input from:

  • steering column control module
  • powertrain control module


Systems Affected:

Adaptive Lighting 2


Sensor(s) in Additional Location(s) (Middle)

OEM Name: (multiple inputs)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Additional Location(s) (Middle) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Receives input from:

  • vehicle dynamics control module 
  • anti-lock brake system module
  • powertrain control module


Systems Affected:

Adaptive Lighting 3


Sensor(s) in Front Bumper Cover/Grille

OEM Name: Front Parking Aid Sensor

Calibration/Initialization Requirement Events:

  • If parking aid sensor is removed
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Not a calibration, but an operation check.


Systems Affected:

Park Assist


Sensor(s) in Front Bumper Cover/Grille (Sides)

OEM Name: Active Park Assist Sensors

Calibration/Initialization Requirement Events:

  • If sensor is removed
Sensor(s) in Front Bumper Cover/Grille (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Not a calibration, but an operation check.


Systems Affected:

Active Park Assist


Sensor(s) in Rear Bumper Cover

OEM Name: Rear Parking Aid Sensor

Calibration/Initialization Requirement Events:

  • If sensor is removed
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Not a calibration, but an operation check.


Systems Affected:

Park Assist


Sensor(s) in Rear Bumper Cover (Sides)

OEM Name: Active Park Assist Sensors

Calibration/Initialization Requirement Events:

  • If sensor is removed
Sensor(s) in Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Not a calibration, but an operation check.


Systems Affected:

Active Park Assist



Additional Information

SEARCH

*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.


Related I-CAR Courses