OEM Calibration Requirements Search
2016 Lincoln MKS
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Video Camera
Calibration/Initialization Requirement Events:
- If camera is replaced
Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Image Processing Module-A
Calibration/Initialization Requirement Events:
- If mirror/camera is replaced
- If suspension work or wheel alignment is performed
- If there is a change in the tire size
- If there is a vehicle collision where the front air bag(s) deployed
- If windshield is replaced
Camera Near Rearview Mirror | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
If replacing the camera with a new one, data will typically need to be transferred from existing camera.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Cruise-Control Module (C-CM)
Calibration/Initialization Requirement Events:
- If sensor is installed
Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Side Obstacle Detection Module
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.
Sensor(s) in Additional Location(s)
OEM Name: Steering Column Control Module
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Parking Aid Sensor — Front
Calibration/Initialization Requirement Events:
- If sensor is installed
Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Not a calibration, but an operation check.
Sensor(s) in Front Bumper Cover/Grille (Sides)
OEM Name: Active Park Assist Sensor
Calibration/Initialization Requirement Events:
- If sensor is installed
Sensor(s) in Front Bumper Cover/Grille (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Not a calibration, but an operation check.
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Aid Sensor — Rear
Calibration/Initialization Requirement Events:
- If sensor is installed
Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Not a calibration, but an operation check.
Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.