OEM Calibration Requirements Search
2021 Buick Envision
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Rearview Driver Information Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Rearview Driver Information Camera
Calibration/Initialization Requirement Events:
- If camera is replaced
- If DTC indicates
Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Front Bumper Cover/Grille
OEM Name: Front View Driver Information Camera
Calibration/Initialization Requirement Events:
- If camera is replaced
- If DTC indicates
Camera in Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Side Mirror (Left)
OEM Name: Side View Driver Information Camera
Calibration/Initialization Requirement Events:
- If camera is replaced
- If DTC indicates
Camera in Side Mirror (Left) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: Side View Driver Information Camera
Calibration/Initialization Requirement Events:
- If camera is replaced
- If DTC indicates
Camera in Side Mirror (Right) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Front View Camera
Calibration/Initialization Requirement Events:
- After a collision repair
- After airbag deployment
- If camera is removed/installed or replaced
- If DTC indicates
- If vehicle height changes due to suspension or tire replacement
- If windshield is removed/installed or replaced
Camera Near Rearview Mirror | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Module programming is required if camera is replaced with a new one.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Forward Range Radar
Calibration/Initialization Requirement Events:
- After a collision repair
- After airbag deployment
- If DTC indicates
- If sensor is removed/installed or replaced
Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Side Obstacle Detection Control Moduel
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Module programming is required if sensor is replaced with a new one.
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Parking Assist Alarm Sensor
Calibration/Initialization Requirement Events:
- If sensor is replaced
Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille (Sides)
OEM Name: Advanced Parking Assist Front Object Sensor
Calibration/Initialization Requirement Events:
- If sensor is replaced
Sensor(s) in Front Bumper Cover/Grille (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Assist Alarm Sensor
Calibration/Initialization Requirement Events:
- If sensor is replaced
Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Rear Bumper Cover (Sides)
OEM Name: Advanced Parking Assist Rear Object Sensor
Calibration/Initialization Requirement Events:
- If sensor is replaced
Sensor(s) in Rear Bumper Cover (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.