OEM Calibration Requirements Search


2019 Hyundai Sonata Plug-in Hybrid

Print

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.


Vehicle System Options

360° Camera View

Surround View Monitoring System
Cameras/Sensors:
Camera in Deck Lid/Liftgate/Tailgate (Middle)
Camera in Front Bumper Cover/Grille
Camera in Side Mirror (Left)
Camera in Side Mirror (Right)
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Cruise Control

Smart Cruise Control System
Cameras/Sensors:
Sensor(s) Behind Front Bumper Cover/Grille
Yes No Not Identified
DTCs Set X
System MIL X



Collision Warning

Autonomous Emergency Braking
Cameras/Sensors:
Camera Near Rearview Mirror
Sensor(s) Behind Front Bumper Cover/Grille
Yes No Not Identified
DTCs Set X
System MIL X



Collision Braking

Autonomous Emergency Braking
Cameras/Sensors:
Camera Near Rearview Mirror
Sensor(s) Behind Front Bumper Cover/Grille
Yes No Not Identified
DTCs Set X
System MIL X



Blind Spot Detection

Blind Spot Detection System
Cameras/Sensors:
Sensor(s) Behind Rear Bumper Cover (Sides)
Yes No Not Identified
DTCs Set X
System MIL X



Lane Departure Warning

Lane Keeping Assist System
Cameras/Sensors:
Camera Near Rearview Mirror
Yes No Not Identified
DTCs Set X
System MIL X



Lane Keep Assist

Lane Keeping Assist System
Cameras/Sensors:
Camera Near Rearview Mirror
Yes No Not Identified
DTCs Set X
System MIL X



Rear View

Back View Camera System
Cameras/Sensors:
Camera in Deck Lid/Liftgate/Tailgate
Yes No Not Identified
DTCs Set X
System MIL X



Park Assist

Parking Assist System
Cameras/Sensors:
Sensor(s) in Rear Bumper Cover
Yes No Not Identified
DTCs Set X
System MIL X



Rear Cross Traffic

Rear Cross Traffic Alert
Cameras/Sensors:
Sensor(s) Behind Rear Bumper Cover (Sides)
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Lighting 1

Smart High Beam
Cameras/Sensors:
Camera Near Rearview Mirror
Yes No Not Identified
DTCs Set X
System MIL X



Adaptive Lighting 2

Auto Head Lamp Leveling Device
Cameras/Sensors:
Sensor(s) in Additional Location(s)
Yes No Not Identified
DTCs Set X
System MIL X




Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Back View Camera

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

Rear View


Camera in Deck Lid/Liftgate/Tailgate (Middle)

OEM Name: Rear Pantoscopic Camera

Calibration/Initialization Requirement Events:

  • If camera is removed/installed or replaced
  • If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
  • If door mirror is replaced
  • If surround view monitoring unit is replaced
Camera in Deck Lid/Liftgate/Tailgate (Middle) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

360° Camera View


Camera in Front Bumper Cover/Grille

OEM Name: Front Pantoscopic Camera

Calibration/Initialization Requirement Events:

  • If camera is removed/installed or replaced
  • If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
  • If door mirror is replaced
  • If surround view monitoring unit is replaced
Camera in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

360° Camera View


Camera in Side Mirror (Left)

OEM Name: Left/Right Pantoscopic Camera

Calibration/Initialization Requirement Events:

  • If around view monitoring unit is replaced
  • If camera is removed/installed or replaced
  • If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
  • If door mirror is replaced
Camera in Side Mirror (Left) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

360° Camera View


Camera in Side Mirror (Right)

OEM Name: Left/Right Pantoscopic Camera

Calibration/Initialization Requirement Events:

  • If camera is removed/installed or replaced
  • If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
  • If door mirror is replaced
  • If surround view monitoring unit is replaced
Camera in Side Mirror (Right) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

360° Camera View


Camera Near Rearview Mirror

OEM Name: Front View Camera

Calibration/Initialization Requirement Events:

  • If camera bracket is damaged
  • If camera is removed/installed or replaced
  • If windshield is replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
After replacing the camera with a new one, the variant coding procedure must be performed.


Systems Affected:

Collision Warning Collision Braking Lane Departure Warning Lane Keep Assist Adaptive Lighting 1


Sensor(s) Behind Front Bumper Cover/Grille

OEM Name: Smart Cruise Control Sensor

Calibration/Initialization Requirement Events:

  • If sensor does not detect a vehicle in front
  • If sensor is removed/installed or replaced
  • If sensor or nearby parts are impacted in a collision
  • If steering angle sensor is replaced or adjusted
  • If vehicle has an accident with structural damage that requires a wheel alignment
Sensor(s) Behind Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
After replacing the sensor with a new one, the variant coding procedure must be performed.


Systems Affected:

Adaptive Cruise Control Collision Warning Collision Braking


Sensor(s) Behind Rear Bumper Cover (Sides)

OEM Name: Blind Spot Collision Warning Unit

Calibration/Initialization Requirement Events:

  • If sensor bracket is replaced
  • If sensor is replaced
  • If vehicle has a rear bumper accident
Sensor(s) Behind Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

Blind Spot Detection Rear Cross Traffic


Sensor(s) in Additional Location(s)

OEM Name: Auto Head Lamp Leveling Unit

Calibration/Initialization Requirement Events:

  • If AHLDM module is replaced
  • If height sensor is replaced
Sensor(s) in Additional Location(s) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

Adaptive Lighting 2


Sensor(s) in Rear Bumper Cover

OEM Name: Parking Assist Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Systems Affected:

Park Assist



Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.


Related I-CAR Courses