OEM Calibration Requirements Search
2016 Hyundai Genesis

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear View Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: LKAS Unit
Calibration/Initialization Requirement Events:
- If camera is replaced
- If windshield is replaced
Camera Near Rearview Mirror | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
After replacing the camera with a new one, the variant coding procedure must be performed.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Smart Cruise Control Unit
Calibration/Initialization Requirement Events:
- If sensor does not detect a vehicle in front
- If sensor is removed/installed or replaced
- If sensor or nearby parts are impacted in a collision
- If steering angle sensor is replaced or adjusted
- If vehicle has an accident with structural damage that requires a wheel alignment
Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
After replacing the sensor with a new one, the variant coding procedure must be performed.
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Detection Unit
Calibration/Initialization Requirement Events:
- If sensor bracket is replaced
- If sensor is replaced
Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
After replacing the sensor with a new one, the variant coding procedure must be performed.
Sensor(s) in Additional Location(s)
OEM Name: Auto Head Lamp Leveling Unit
Calibration/Initialization Requirement Events:
- If control module is replaced
- If height sensor is replaced
Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Parking Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.