OEM Calibration Requirements Search
2021 Lexus NX 300h
Share:
|
Print
Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Front Bumper Cover/Grille
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Camera in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Left)
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Camera in Side Mirror (Left) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If any camera or body component that camera is attached to is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Camera in Side Mirror (Right) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Front Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Millimeter Wave Radar Sensor
Calibration/Initialization Requirement Events:
- If beam axis mechanism position is changed
- If DTC indicates
- If front bumper installation area on the body is repaired
- If front bumper is damaged or deformed due to an accident or contact with other objects, etc.
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Additional Location(s) (1)
OEM Name: Steering Angle Sensor
Calibration/Initialization Requirement Events:
- If battery terminal is disconnected and connected
- If DTC indicates
- If headlamp assembly is removed/installed or replaced
- If headlamp ECU is replaced
| Sensor(s) in Additional Location(s) (1) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Additional Location(s) (2)
OEM Name: (multiple inputs)
Calibration/Initialization Requirement Events:
- If auxiliary battery terminal is disconnected and connected
- If DTC indicates
- If headlamp assembly is removed/installed or replaced
- If headlamp ECU is replaced
- If height control sensor is removed/installed or replaced
- If suspension components are replaced
| Sensor(s) in Additional Location(s) (2) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Receives input from:
- rear height control sensor
- steering angle sensor
- vehicle speed sensor
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- If auxiliary battery terminal is disconnected and connected
- If clearance warning ECU is replaced
- If DTC indicates
- If front bumper cover/grille is removed/installed or replaced
- If sensor becomes misaligned
- If sensor is removed/installed or replaced
- If sensor is subjected to impact
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)
OEM Name: Blind Spot Monitor Sensor
Calibration/Initialization Requirement Events:
- If DTC indicates
- If sensor installation area is damaged or deformed
- If sensor is removed/installed or replaced
| Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- If auxiliary battery terminal is disconnected and connected
- If clearance warning ECU is replaced
- If DTC indicates
- If rear bumper cover is removed/installed or replaced
- If sensor becomes misaligned
- If sensor is removed/installed or replaced
- If sensor is subjected to impact
- If steering angle sensor is removed/installed, replaced, or disconnected
- If vehicle ride height changes
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.
