OEM Calibration Requirements Search
2019 Lexus RX
Share:
|
Print
Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
| Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Television Camera (for Rear)
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
- If two or more cameras or body components that cameras are attached to are removed/installed or replaced
| Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Front Bumper Cover/Grille
OEM Name: Television Camera (for Front)
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If front bumper cover/grille is removed/installed or replaced
- If parking assist ECU is replaced
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
- If two or more cameras or body components that cameras are attached to are removed/installed or replaced
| Camera in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Left)
OEM Name: Television Camera (for Side)
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If side mirror is removed/installed or replaced
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
- If two or more cameras or body components that cameras are attached to are removed/installed or replaced
| Camera in Side Mirror (Left) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Side Mirror (Right)
OEM Name: Television Camera (for Side)
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If parking assist ECU is replaced
- If side mirror is removed/installed or replaced
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
- If two or more cameras or body components that cameras are attached to are removed/installed or replaced
| Camera in Side Mirror (Right) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Front Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Millimeter Wave Radar Sensor
Calibration/Initialization Requirement Events:
- If DTC indicates
- If front bumper cover/grille is removed/installed or replaced
- If front bumper installation area on body is repaired
- If front bumper is damaged or deformed due to an accident or contact with other objects, etc.
- If mounting bracket is removed/installed or replaced
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Additional Location(s)
OEM Name: (multiple inputs)
Calibration/Initialization Requirement Events:
- If battery terminal is disconnected and connected
- If DTC indicates
- If headlamp ECU is removed/installed or replaced
- If height sensor is removed/installed or replaced
- If suspension components and tires are replaced
| Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Receives input from:
- steering angle sensor
- height sensor
- speed sensor
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- If clearance warning ECU is replaced
- If DTC indicates
- If front bumper cover/grille is removed/installed or replaced
- If negative battery terminal is disconnected and connected
- If sensor becomes misaligned
- If sensor is removed/installed or replaced
- If sensor is subjected to impact
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)
OEM Name: Blind Spot Monitor Sensor
Calibration/Initialization Requirement Events:
- If DTC indicates
- If sensor is removed/installed or replaced
| Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- If clearance warning ECU is replaced
- If DTC indicates
- If negative battery terminal is disconnected and connected
- If rear bumper cover is removed/installed or replaced
- If sensor becomes misaligned
- If sensor is removed/installed or replaced
- If sensor is subjected to impact
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.
