OEM Calibration Requirements Search
2017 Kia Optima PHEV
Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate (Rear View Only)
OEM Name: Back View Camera
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Camera in Deck Lid/Liftgate/Tailgate (Rear View Only) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera in Deck Lid/Liftgate/Tailgate (With 360° View)
OEM Name: Rear Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Deck Lid/Liftgate/Tailgate (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
OEM Name: Front Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Front Bumper Cover/Grille (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
OEM Name: Right Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Side Mirror (With 360° View) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
OEM Name: Left Pantoscopic Camera
Calibration/Initialization Requirement Events:
- If a wide camera is removed/installed
- If conducting a body task, such as the trunk task, that causes the focus of the wide camera to change
- If door mirror with a wide camera is replaced
- If surround view monitoring unit is replaced
| Camera in Side Mirror (With 360° View) Left | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: LKAS Unit
Calibration/Initialization Requirement Events:
- if camera coupler is deformed
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield glass is removed/installed or replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
When replacing the front view camera with a new one, perform the variant coding procedure.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Advanced Smart Cruise Control Unit - Radar
Calibration/Initialization Requirement Events:
- If radar sensor or the surrounding parts are impacted by a collision
- If sensor does not detect a vehicle in front
- If sensor is reinstalled or replaced
- If steering angle sensor is replaced or adjusted
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) Behind Rear Bumper Cover (Sides)
OEM Name: Blind Spot Detection Unit
Calibration/Initialization Requirement Events:
- If rear bumper accident occurs
- If sensor is removed/installed or replaced
| Sensor(s) Behind Rear Bumper Cover (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Sensor(s) in Additional Location(s)
OEM Name: Multiple Inputs
Calibration/Initialization Requirement Events:
- If ALFS ECU is replaced
- If height sensor is replaced
| Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Receives input from:
- front height sensor
- rear height sensor
- speed sensor
- steering angle sensor
Sensor(s) in Rear Bumper Cover
OEM Name: Parking Assist Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
| Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.
