OEM Calibration Requirements Search
2016 Lexus ES
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Television Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If radio receiver assembly is replaced
- If spiral cable sub-assembly is removed/installed or replaced
- If steering angle sensor is removed/installed or replaced
- If suspension components and tires are replaced
Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Front Camera
Calibration/Initialization Requirement Events:
- If camera is removed/installed or replaced
- If DTC indicates
- If windshield is removed/installed or replaced
Camera Near Rearview Mirror | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Millimeter Wave Radar
Calibration/Initialization Requirement Events:
- If DTC indicates
- If front bumper cover/grille is removed/installed or replaced
- If front bumper installation area on the body is repaired
- If front bumper is damaged or deformed due to an accident or contact with other objects, etc.
- If mounting bracket is removed/installed or replaced
- If sensor is removed/installed or replaced
Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Additional Location(s)
OEM Name: (multiple inputs)
Calibration/Initialization Requirement Events:
- If DTC indicates
- If headlamp ECU is removed/installed or replaced
- If height sensor is removed/installed or replaced
- If suspension components and tires are replaced
Sensor(s) in Additional Location(s) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Note:
Receives input from:
- steering angle sensor
- height sensor
- speed sensor
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)
OEM Name: Blind Spot Monitor Sensor
Calibration/Initialization Requirement Events:
- If DTC indicates
- If sensor is removed/installed or replaced
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Sensor(s) in Rear Bumper Cover
OEM Name: Ultrasonic Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
DTC Set | X | ||
Scan Tool Required | X | ||
Special Tools Required | X |
Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.