OEM Calibration Requirements Search
2019 Ford Ranger
Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear Parking Aid Camera
Calibration/Initialization Requirement Events:
- If battery is disconnected or discharged
- If camera is replaced
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Image Processing Module A
Calibration/Initialization Requirement Events:
- If camera is installed
- If front air bag is deployed
- If interior mirror is replaced
- If suspension is repaired, aligned, or modified
- If there is a change in the tire size
- If windshield is replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
If replacing the camera with a new one, data will typically need to be transferred from existing camera.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Cruise Control Module
Calibration/Initialization Requirement Events:
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.
Sensor(s) in Front Bumper Cover/Grille
OEM Name: Front Parking Aid Sensor
Calibration/Initialization Requirement Events:
- If sensor is installed
| Sensor(s) in Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Not a calibration, but an operation check.
Sensor(s) in Rear Bumper Cover
OEM Name: Rear Parking Aid Sensor
Calibration/Initialization Requirement Events:
- If sensor is installed
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Not a calibration, but an operation check.
Sensor(s) in Tail Lamp (Sides)
OEM Name: Side Obstacle Detection Control Module
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Tail Lamp (Sides) | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.
| Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. Please refer back to this page frequently to ensure the most up-to-date information. The contents are based on the repair information available from the vehicle maker. Updates and additions will be posted as they become available. To ensure that the most recent information is used, always refer to the vehicle maker's technical information.
