Working With Boron-Alloyed Steel - Removal (Cutoff Wheel)

Posted on 23 June 2014 Print
Try using a cutoff wheel to remove spot welds from UHSS parts.

When attempting to cut boron-alloyed steel using a cutoff wheel, you may question whether you will even be able to cut the part or just be using up discs?

The good news is that a cutoff wheel is a great way to remove spot welds or large pieces of a damaged boron-alloyed part. Depth control may be an issue, which can make it difficult to cut only one panel. Depth control when removing spot welds can be done by closely monitoring the grinding area. To do this, move the cutoff wheel back and forth until the metal turns slightly blue or a line is seen around the spot weld, which is an indication that it has gone through the first panel. Stop at this point and move on to the next weld.

There may be some concern about how much heat is generated from this removal method. The amount of heat that is generated from the cutoff wheel is only about 148ºC (300ºF) in the immediate grind area. This temperature is far below any kind of welding that will be done on a vehicle so the heat-affect zone (HAZ) in this case is not a concern.

Some may find that a thin cutoff wheel works the best, while others like to use a thicker cutoff wheel. It is a good idea to try both to see which disc you prefer. After the welds have been ground to the correct depth, chisel the welds apart to remove the panel.


Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Course Advanced High-Strength Steel

  • I-CAR Just In Time: Cybertruck Tuesday, 11 March 2025

    Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips...

  • GM Repair Insights: Winter 2025 Monday, 10 March 2025

    The winter edition of General Motors (GM) Repair Insights magazine is now available.

  • Refinishing Park Assist Sensors: Genesis Friday, 7 March 2025

    Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require...

  • Refinishing Park Assist Sensors: Hyundai Friday, 7 March 2025

    Park assist sensors are part of the park assist system, just one of many advanced driver assistance systems (ADAS) found on vehicles today. Damaged sensors are typically replaced and may require...

  • Structural Straightening: Rivian Wednesday, 5 March 2025

    What should you do when a damaged Rivian comes into your repair facility? Can you measure it? Can it be straightened? What needs to be replaced?

  • Bumper Cover Repair With ADAS: Genesis Thursday, 27 February 2025

    A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS)...

  • Bumper Cover Repair With ADAS: Hyundai - UPDATE Thursday, 27 February 2025

    A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS)...

  • I-CAR Repairers Realm: SATA New Equipment And Technologies - Now Available Wednesday, 26 February 2025

    I-CAR staff discussed recent developments in SATA equipment and technology.

  • Calibration Research Tips: Ford/Lincoln Park Assist Operation Check - UPDATE Thursday, 20 February 2025

    While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by...

  • Honda Has Released The 2026 Passport Body Repair News Wednesday, 19 February 2025

    Honda has released a Body Repair News bulletin for the 2026 Passport. This document contains at-a-glance information for this model.