OEM Calibration Requirements Search
2019 Ford Mustang
Print
Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.
Camera in Deck Lid/Liftgate/Tailgate
OEM Name: Rear Parking Aid Camera
Calibration/Initialization Requirement Events:
- If camera is replaced
| Camera in Deck Lid/Liftgate/Tailgate | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Camera Near Rearview Mirror
OEM Name: Lane Keeping Camera
Calibration/Initialization Requirement Events:
- If front air bag is deployed
- If interior mirror is replaced
- If there is a change in the tire size
- If there is suspension repair, alignment, or modification
- If windshield is replaced
| Camera Near Rearview Mirror | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
If replacing the camera with a new one, data will typically need to be transferred from existing camera.
Sensor(s) Behind Front Bumper Cover/Grille
OEM Name: Cruise Control Module (CCM)
Calibration/Initialization Requirement Events:
- If sensor is removed/installed or replaced
| Sensor(s) Behind Front Bumper Cover/Grille | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.
Sensor(s) Behind Rear Bumper Cover
OEM Name: Side Obstacle Detection Control Module
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) Behind Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.
Sensor(s) in Rear Bumper Cover
OEM Name: Rear Parking Aid Sensor
Calibration/Initialization Requirement Events:
- No calibration/initialization requirements found
| Sensor(s) in Rear Bumper Cover | Yes | No | Not Identified |
| DTC Set | X | ||
| Scan Tool Required | X | ||
| Special Tools Required | X |
Note:
Per the Ford Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)
| Additional Information | |
*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.
