OEM Calibration Requirements Search


2016 Ford Flex

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.



Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Video Camera

Calibration/Initialization Requirement Events:

  • If camera is removed/installed or replaced
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) Behind Front Bumper Cover/Grille

OEM Name: Cruise-Control Module (C-CM)

Calibration/Initialization Requirement Events:

  • If sensor is removed/installed or replaced
Sensor(s) Behind Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.



Sensor(s) Behind Rear Bumper Cover (Sides)

OEM Name: Side Obstacle Detection (SOD) Module

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.



Sensor(s) in Front Bumper Cover/Grille

OEM Name: Active Park Assist Sensor

Calibration/Initialization Requirement Events:

  • If sensor is installed
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Not a calibration, but an operation check.



Sensor(s) in Rear Bumper Cover

OEM Name: Parking Aid Sensor

Calibration/Initialization Requirement Events:

  • If sensor is installed
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Not a calibration, but an operation check.



Additional Information


*This matrix does not currently contain all production vehicles sold in the United States. The contents are based on OEM vehicle-specific repair information, other OEM-supplied documents available from the vehicle maker, and the I-CAR OEM Linking Pin process. Updates and additions will be posted as they become available. To ensure that you are using the most recent information, always refer to vehicle maker technical information. Information displayed in quotes ("") are direct quotes from the OEM-specific/vehicle-specific information and/or the I-CAR OEM Linking Pin process.


Related I-CAR Courses