OEM Calibration Requirements Search


2025 Lincoln Aviator

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.



Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Rear Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
  • If DTC indicates
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera in Front Bumper Cover/Grille

OEM Name: Front Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
  • If DTC indicates
Camera in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera in Side Mirror (Left)

OEM Name: Side Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
  • If DTC indicates
Camera in Side Mirror (Left) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera in Side Mirror (Right)

OEM Name: Side Parking Aid Camera

Calibration/Initialization Requirement Events:

  • If any camera or body component that camera is attached to is removed/installed, replaced, or adjusted
  • If DTC indicates
Camera in Side Mirror (Right) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera Near Rearview Mirror

OEM Name: Image Processing Module A Camera

Calibration/Initialization Requirement Events:

  • After front airbag deployment
  • If camera is removed/installed or replaced
  • If DTC indicates
  • If suspension is repaired or aligned
  • If tire size is changed
  • If windshield is removed/installed or replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) Behind Front Bumper Cover/Grille

OEM Name: Cruise Control Module

Calibration/Initialization Requirement Events:

  • If DTC indicates
  • If sensor is removed/installed or replaced
  • If sensor mounting bracket is removed/installed or replaced
  • If vehicle has been in a collision
Sensor(s) Behind Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) Behind Front Bumper Cover/Grille (Sides)

OEM Name: Side Obstacle Detection Control Module C/D

Calibration/Initialization Requirement Events:

  • If DTC indicates
  • If sensor is removed/installed or replaced
Sensor(s) Behind Front Bumper Cover/Grille (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Additional Location(s) (1)

OEM Name: (multiple inputs)

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Additional Location(s) (1) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Receives input from:

  • Image Processing Module A Camera
  • steering angle sensor
  • vehicle speed sensor



Sensor(s) in Additional Location(s) (2)

OEM Name: vehicle speed sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Additional Location(s) (2) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Front Bumper Cover/Grille

OEM Name: Front Parking Aid Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Per the Lincoln Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)



Sensor(s) in Quarter Panel Behind Bumper Cover (Sides)

OEM Name: Side Obstacle Detection Control Module

Calibration/Initialization Requirement Events:

  • If DTC indicates
  • If sensor is removed/installed or replaced
Sensor(s) in Quarter Panel Behind Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Rear Bumper Cover

OEM Name: Rear Parking Aid Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Per the Lincoln Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)



Additional Information