Scheduled Maintenance

The site may be unavailable due to scheduled maintenance from Wednesday, May 8th starting at 7 PM - 9 PM CDT.
During this time, the website may not be available. If you experience issues, please check back later.
Thank you for your patience, and we apologize for any inconvenience.

Close
MENU

Follow us on @Ask_ICAR for daily updates.

Home / Collision Repair News / Calibration Research Tips: BMW/Mini Calibration Information Table

Calibration Research Tips: BMW/Mini Calibration Information Table

Posted on 20 October 2020 | Share: | Print Print

While searching for information on advanced driver assistance systems (ADAS) on an OEM repair information site, you may come across unique calibration procedures or events. These events can vary by year and model, even within a particular make. As the RTS team has been researching these systems, we have been identifying these atypical circumstances. In order to help you better understand them, we are putting together a series of articles that with the repair and calibration of ADAS. Let’s take a closer look at BMW/Mini calibration requirement information.

BMW/Mini provides ADAS calibration information in the vehicle-specific service manuals. The information is typically found in the same location.

On many vehicles, BMW/Mini also includes an ADAS table in the electronic service manual titled Overview Of Additional Work For The Removal And Installation Or Replacement Of Electronic Components In The Body Area/Windscreen. This document is easily found by performing a search for the bolded title above after entering a VIN.

The document is a table that will list a sensor/camera and show relevant related information such as:

  • Removal and installation calibration requirements
  • Replacement calibration requirements
  • Special tools required for removal or replacement
  • Special notes relating to the sensor/camera

The table will look similar from model to model, and calibration events for specific sensors/cameras may be the same. However, this does not mean that the tables are universal or interchangeable. The correct vehicle-specific table should always be used.

It is important to always follow OEM procedures for repairs and calibration. Finding this information quickly and efficiently contributes to a complete, safe, and quality repair.

For additional BMW/Mini information, check out the following pages:
BMW OEM Information
Mini OEM Information

Additional I-CAR Collision Repair News you may find helpful:

Related I-CAR Courses

Course BMW Collision Repair Overview

Course I-CAR ADAS Courses

Top Ten Vehicle Specific Questions

Hyundai Does Hyundai have a sectioning procedure available?
Kia Does Kia have a sectioning procedure available?
Chevrolet Does Chevrolet have a warning against sectioning when there is no procedure?
BMW Can I-CAR send me BMW repair procedures?
Hyundai Does Hyundai have part replacement procedures available?
Honda What does Honda say about repairing damaged airbag system wiring harnesses?
Mercedes-Benz Can I-CAR send me Mercedes-Benz repair procedures?
Honda What does Honda say about straightening front lower rails?
Subaru Do you have to replace a front passenger airbag on a Subaru even if the airbag did not deploy? The repair information seems to indicate that it should.
Nissan Is there a wiring repair procedure for the airbag connector?

Top Ten I-CAR Specific Questions

What does I-CAR say about using a recycled quarter panel assembly that includes the inner, outer, and reinforcements?
What does I-CAR say about straightening a kink?
Can I-CAR General Sectioning Guidelines be used?
What does I-CAR say about repairing damaged door intrusion beams?
What does I-CAR say about the decision to use recycled parts?
What does I-CAR say about replacing suspension parts in pairs?
What does I-CAR say about repairing damaged bumper reinforcements?
What does I-CAR say about repair tolerances?
What does I-CAR say about using recycled airbags?
What does I-CAR say about repairing damaged crush boxes?