PrintDISABLE PROCEDURE AND TIME (Always Check Service Manual)
When working on the airbag system, the battery ground strap must be disconnected. No waiting time is necessary after disconnecting battery.REV: 07/2018
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Always replace the following components after an accident when airbag has deployed:• All deployed airbag units [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL; AIRBAG,FRONT SEAT; AIRBAG,QTR PANEL; AIRBAG,ROOF]
• (Components) Supporting the front passenger airbag unit when deployed
• Coil connector with slip ring [CLOCK SPRING], if driver airbag deployed
• All Seat belts with deployed seat belt tensioners
• If a deployed head curtain airbag is replaced, the headliner, door seals with weather stripping, curtain airbag guides, grab handle brackets, and the A, B, C and (if equipped) D-pillar trim must be replaced.
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Test the system with a suitable vehicle tester.If needed (visual inspection), the following must also be replaced: all faulty components.
Passenger Occupant Detection System:
• Each time passenger airbag and/or belt pretensioner on passenger side is deployed, Seat Occupied Recognition Control Module -J706• basic setting must be performed
• If the seat rails and/or the seat pan must be replaced after a accident due to deformation, the seat occupied recognition must also be replaced with seat occupied recognition repair kit.
• Seat belt system
• If a passenger airbag is replaced, check if an additional ground cable must be routed in the vehicle, it is necessary in some cases.
• If a deployed head curtain airbag is replaced, inspect the rear interior lights, the roof grab handles and the roof end strip, if damaged, replace.
If a deployed head curtain airbag is replaced:
• If damaged, the rear interior lights, the roof grab handles and the roof end strip must be replaced.