OEM Restraints System Part Replacement Search

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

The pyrotechnic components may be check only when they are installed and with a Volkswagen approved vehicle
diagnosis, testing and information system

When working on pyrotechnic components and on the Air-
bag control module:
1) The battery ground cable must be disconnected when the ignition is switched on.
2) Cover the negative pole.
3) Wait for 10 seconds after disconnecting the battery

REV: 11/2016

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

After an accident with airbag deployment, the following components must be replaced:

• All deployed/ triggered airbag units [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL; AIRBAG,FRONT SEAT; AIRBAG,REAR SEAT; AIRBAG,ROOF]
• Support and bracket for the front passenger airbag unit with a deployed front passenger airbag
• Return ring with slip ring, if driver side airbag deployed [CLOCK SPRING/LVR,STRG ]
• All seat belts with deployed seat belt tensioners
• If the seat rails and/or seat pan is replaced after an accident due to deformations resulting from a crash, the passive occupant detection system must be replaced using the passenger occupant detection system pressure sensor -G452• .

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• If needed (visual inspection), the following must also be replaced: all faulty components.
• After an accident, child seat anchors must be inspected for damage and deformation
• Seat belt system
• Each time passenger airbag and/or belt pretensioner on passenger side is deployed, Seat Occupied Recognition Control Module -J706• basic setting must be performed.