OEM Restraints System Part Replacement Search

2007 Mitsubishi Endeavor

Print

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

WARNING
Service or maintenance of any SRS component or SRS-related component must be performed only at an authorized MITSUBISHI dealer.

1. Turn the ignition key to the "LOCK" (OFF) position
2. Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment.
3. Wait at least 60 seconds after disconnecting the battery cable before doing any further work.

REV: 03/2011

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

After the air bag deployment, replace the air bag module with a new one:

WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:

• SRS-ECU [MODULE,AIRBAG CONTROL]
• Airbag modules [AIRBAG, STEERING WHEEL; AIRBAG, INSTRUMENT PNL], if deployed
• After deployment of an air bag, replace the clock spring with a new one
• Seat belt with pre-tensioner, if deployed
• Seat adjuster [TRACK,DRIVER BUCKET; TRACK,PASS BUCKET]
• Front impact sensors [AIRBAG SENSOR,FENDER]
• Instrument panel
• Any damaged restraint system part

WHEN SIDE AND CURTAIN AIR
BAGS DEPLOY IN A COLLISION:

• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors (front and rear) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• Front seatback assembly and seat adjuster [AIRBAG & SEAT BACK ASSY] and [TRACK,DRIVER BUCKET; TRACK,PASS BUCKET] on deployed side
• Seat belt with pre-tensioner, if deployed
• Any damaged restraint system part

WHEN CURTAIN AIR BAGS DEPLOY IN A COLLISION:

• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors (rear) [AIRBAG SENSOR,QTR PANEL]
• Seat adjuster [TRACK,DRIVER BUCKET; TRACK,PASS BUCKET]
• Curtain airbag modules [AIRBAG, ROOF], if deployed
• Seat belt with pre-tensioner, if deployed
• Any damaged restraint system part

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

• Perform SRS-ECU memory check
• Check the SRS components. If the SRS components are showing any visible damage such as dents, cracks, or deformation, replace them with new ones

WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:

• Seat slide sensor
• Seat belt switch
Steering wheel, steering column and shaft assembly
• Check the wiring harnesses for binding, the connectors for damage, poor connections, and the terminals for deformation

WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:

• Check the wiring harnesses for binding, the connectors for damage, poor connections, and the terminals for deformation
Additional Information