OEM Restraints System Part Replacement Search
2009 Volkswagen Golf (City)
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Battery ground (GND) strap must be disconnected. No waiting time is necessary after disconnecting the battery.Note:
Technicians must electrostatically discharge themselves by touching a grounded metal part like, for example, water pipes, heater pipes or metal carriers.
Note:
When removing a front seat equipped with a side airbag, special tool VAS 5094 must be connected before seat removal.
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
For a front airbag deployment:• All deployed airbag units with control modules and sensors
• Support for front passenger module
• Return spring with slip ring [Clockspring]
• All seatbelts with belt tensioners that have been triggered
• Any damaged restraint system part
For a side airbag deployment:
• Seat cover and clips
• All deployed airbag units with control modules and sensors
• All airbag wiring harnesses if the side airbag is deployed
• All seatbelts with belt tensioners that have been triggered
• Seat cover and cover clips, if unit is deployed
• Any damaged restraint system part
For a curtain side airbag deployment:
• All deployed airbag units with control modules and sensors
• Pillar trims (A, B, and C pillar trims)
• Door seal
• Guide piece for head airbag
• Headliner
• Reading light, rear
• Grab handle
• Bracket grab handle
• Connecting strip (for headliner)
• All seatbelts with belt tensioners that have been triggered
• Any damaged restraint system part
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Airbag control module does not need to be replaced after deployment unless "Control module faulty" DTC is set in the control module or the module is damaged.• Seatbelt system
• Seat belt securing parts and mounting points
• Any restraint system part or wiring identified by diagnostic check
Warning!
The seat belt system is to be systematically checked after every accident! If damage has been found according to check points, the customer is to be notified of the necessity of a seat belt replacement.
Seat Belt Check Points:
• Check belt webbing
• Check automatic retraction (stop function)
• Visual check of belt buckle
• Function check of belt buckle
• Checking guide stops and seat belt buckle tongue
• Check attachment components and attachment points
| Additional Information |