OEM Restraints System Part Replacement Search
2008 Mitsubishi Galant
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
WARNINGService or maintenance of any SRS component or SRS-related component must be performed only at an authorized MITSUBISHI dealer.
1. Turn the ignition key to the "LOCK" position, disconnect the negative battery cable and tape the terminal.
2. Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
For a front air bag deployment:• SRS-ECU
• Airbag modules
• Clock spring
• Seat belt with pre-tensioner
• Front passenger seat assembly with passenger/instrument panel airbag deployment (Galant only)
• Front impact sensors (Galant and Lancer Evolution only)
• Seat slide sensor
• Instrument panel (Galant and Lancer Evolution only)
• Any damaged restraint system part
For a side air bag deployment:
• SRS-ECU
• Side impact sensors
• Front seat assembly (Galant only)
• Curtain air bag modules [Roof Airbags] (Galant only)
• Front seatback assembly (Lancer only)
• Any damaged restraint system part
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
For a front air bag deployment:• Seat slide sensor (Galant only)
• Seat belt switch (Galant only)
• Steering wheel, steering column shaft assembly, including shock absorbing mechanism
• Wiring harness (including the one built into the steering wheel), connectors and terminals. (Minor repairs allowed • check service manual)
• Any restraint system part or wiring identified by diagnostic check
For a side air bag deployment:
• Wiring harnesses, connectors and terminals (Minor repairs allowed • check service manual)
• Any restraint system part or wiring identified by diagnostic check
| Additional Information |