OEM Restraints System Part Replacement Search
2022 Mitsubishi Mirage G4
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
WARNINGService or maintenance of any SRS component or SRS-related component must be performed only at an authorized MITSUBISHI dealer.
1. Turn the ignition key to the "LOCK" (OFF) position
2. Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment
3. Wait 60 seconds or more before proceeding with work.
REV: 08/2024
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
After the air bag deployment, replace the air bag module with a new one.WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• DRIVERS air bag module [AIRBAG, STEERING WHEEL], if deployed
• Passenger’s (front) air bag module [AIRBAG, INSTRUMENT PNL], if deployed
• Knee air bag module [AIRBAG,KNEE BOLSTER], if deployed
• Seat belt with pre-tensioner
• Front impact sensors [AIRBAG SENSOR,FRONT]
• Seat slide sensor [AIRBAG SENSOR,SEAT TRACK]
WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Front seatback assembly [AIRBAG & SEAT BACK ASSY], if deployed, When replacing the side-airbag module, replace the seat frame assembly
• Curtain air bag module [AIRBAG,ROOF], if deployed
• Side impact sensor (front and rear) [AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL]
• Headlining
• Front pillar trim, center pillar trim upper, quarter trim upper
• Seat belt with pre-tensioner
WHEN CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors (rear) [AIRBAG SENSOR,QTR PANEL]
• Front passenger’s seat cushion frame assembly (Occupant classification-ECU and weight sensor)
• Curtain airbag modules [AIRBAG, ROOF], if deployed
• Seat belt with pre-tensioner
WHEN CURTAIN AIR BAGS DEPLOY AND SEAT BELT PRE-TENSIONER OPERATE IN A COLLISION:
• SRS-ECU [MODULE,AIRBAG CONTROL]
• Side impact sensors (rear) [AIRBAG SENSOR,QTR PANEL]
• Front passenger’s seat cushion frame assembly (Occupant classification-ECU and weight sensor)
• Curtain airbag modules [AIRBAG, ROOF], if deployed
• Seat belt with pre-tensioner
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Perform SRS-ECU memory check• Check the SRS components. If the SRS components are showing any visible damage such as dents, cracks, or deformation, replace them with new ones
• Check the wiring harness for binding, the connector for damage, and the terminal for deformation
WHEN FRONT AIR BAGS DEPLOY IN A COLLISION:
• Clock spring
• Steering wheel, steering column assembly
• Instrument panel assembly
• Check the wiring harness for binding, the connector for damage, and the terminal for deformation
WHEN SIDE AND CURTAIN AIR BAGS DEPLOY IN A COLLISION:
• Check the wiring harness for binding, the connector for damage, and the terminal for deformation
| Additional Information |