OEM Calibration Requirements Search

2016 Lincoln MKS

Print

Click the links below for directions; definitions; articles; and additional RTS portal information such as OEM position statements and publications.

How To Use The OEM Calibration Requirements Search

Vehicle System Definitions

ADAS, Calibration, And Scanning Article Hotspot

Additional RTS OEM Information


Camera in Deck Lid/Liftgate/Tailgate

OEM Name: Video Camera

Calibration/Initialization Requirement Events:

  • If camera is replaced
Camera in Deck Lid/Liftgate/Tailgate Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Camera Near Rearview Mirror

OEM Name: Image Processing Module-A

Calibration/Initialization Requirement Events:

  • If mirror/camera is replaced
  • If suspension work or wheel alignment is performed
  • If there is a change in the tire size
  • If there is a vehicle collision where the front air bag(s) deployed
  • If windshield is replaced
Camera Near Rearview Mirror Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the camera with a new one, data will typically need to be transferred from existing camera.


Sensor(s) Behind Front Bumper Cover/Grille

OEM Name: Cruise-Control Module (C-CM)

Calibration/Initialization Requirement Events:

  • If sensor is installed
Sensor(s) Behind Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.


Sensor(s) Behind Rear Bumper Cover (Sides)

OEM Name: Side Obstacle Detection Module

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) Behind Rear Bumper Cover (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
If replacing the sensor with a new one, data will typically need to be transferred from existing sensor.


Sensor(s) in Additional Location(s)

OEM Name: Steering Column Control Module

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Additional Location(s) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Sensor(s) in Front Bumper Cover/Grille

OEM Name: Parking Aid Sensor — Front

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Per the Lincoln Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)


Sensor(s) in Front Bumper Cover/Grille (Sides)

OEM Name: Active Park Assist Sensor

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Front Bumper Cover/Grille (Sides) Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Per the Lincoln Workshop manual, an operation check is required. (Azimuth System Check)


Sensor(s) in Rear Bumper Cover

OEM Name: Parking Aid Sensor — Rear

Calibration/Initialization Requirement Events:

  • No calibration/initialization requirements found
Sensor(s) in Rear Bumper Cover Yes No Not Identified
DTC Set X
Scan Tool Required X
Special Tools Required X

Note:
Per the Lincoln Workshop manual, operation checks are required. (Azimuth System Check, Elevation System Check)


Additional Information