OEM Restraints System Part Replacement Search
2017 Lexus LS 460
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
1. Turn ignition switch to OFF2. Disconnect and isolate negative battery cable.
3. Wait at least 90 seconds.
When the cable is disconnected from the negative (-) battery terminal, the memory of various systems will be cleared. Because of this, be sure to make a record of the contents memorized in each system before starting work. When work is finished, adjust each system to its previous state.
REV: 12/2016
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When any of the airbags have deployed due to the collision, be sure to replace all sensors in the damaged areas and center airbag sensor assembly [AIRBAG SENSOR,FRONT; AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,QTR PANEL; AIRBAG SENSOR,SIDE; MODULE, AIRBAG CONTROL]• Deployed Steering wheel pad [AIRBAG, STEERING WHEEL]
• Deployed Front passenger airbag assembly [AIRBAG,INSTRUMENT PNL]
• Deployed Driver side knee airbag assembly, [AIRBAG,KNEE BOLSTER]
• Deployed Front passenger side knee airbag assembly, [AIRBAG,KNEE BOLSTER]
• Deployed Curtain shield airbag assembly, [AIRBAG,ROOF]
• Deployed Side seat airbag [AIRBAG & SEAT BACK ASSY; AIRBAG SNSR & CUSHION, AIRBAG & SEAT BACK ASSY]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
DTCs are the most important source of information when troubleshooting. During troubleshooting, always confirm DTCs before disconnecting the cable from the negative battery terminal.• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat airbag [AIRBAG & SEAT BACK ASSY]
• Driver side knee airbag [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag [AIRBAG,KNEE BOLSTER]
• Rear seat side airbag [AIRBAG & SEAT BACK ASSY]
• Seat cushion airbag [AIRBAG SNSR & CUSHION]
• Seat belt pretensioner
• Center airbag sensor [MODULE,AIRBAG CONTROL]
• Front airbag sensor [AIRBAG SENSOR,FRONT]
• Side airbag sensor [AIRBAG SENSOR,SIDE]
• Rear airbag sensor [AIRBAG SENSOR,QTR PANEL]
• Door side airbag sensor [AIRBAG SENSOR,FRT DOOR]
• Occupant classification ECU
• Seat position sensor [AIRBAG SENSOR,SEAT TRACK]
• Replace the faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that was in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems
| Additional Information |