OEM Restraints System Part Replacement Search

2015 Kia K900

Print

DISABLE PROCEDURE AND TIME (Always Check Service Manual)

Before removing any of the SRSCM parts (including the disconnection of the connectors), always disconnect the SRSCM connector

1. Turn ignition switch OFF
2. Disconnect the battery negative cable
3. Wait at least three minutes before beginning work

REV: 09/2019

PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT

When the front airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG,STEERING WHEEL; AIRBAG,INSTRUMENT PNL]
• If the Passenger Airbag (PAB) has been deployed, replace the damaged crash pad
• Seat belt pretensioner(s)
• Anchor pretensioner(s)
• Front Impact Sensors [AIRBAG SENSOR,FRONT]


When the side/curtain airbag(s) deployed after a collision, replace the following items:
• SRSCM [MODULE,AIRBAG CONTROL]
• Deployed airbag(s) [AIRBAG & SEAT BACK ASSY (front) AIRBAG & SEAT BACK ASSY (rear); AIRBAG,ROOF]
• Side impact sensor(s) for the deployed side(s) [AIRBAG SENSOR,FRT DOOR; AIRBAG SENSOR,QTR PANEL

PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED

Before doing any SRS repairs, use the GDS to check for DTCs.

• Inspect the clock spring for heat damage. If any damage found, replace the clock spring.
• Steering wheel
• ODS
• After the vehicle is completely repaired, confirm the SRS airbag system is OK
Additional Information