OEM Restraints System Part Replacement Search
2014 BMW X1
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
• Inspection, testing and installation work may only be carried out by expert trained personnel in BMW Service.• Work on components of the airbag system should only ever be carried out with the battery disconnected, the negative terminal post covered and the plug connection of the cable leading to the gas generator disconnected. If only the battery is
disconnected, the following prescribed waiting period must be observed without fail:
1 minute for vehicles from 9/93
• When carrying out straightening and welding work with an electric welder:
• Disconnect battery
• Cover negative terminal (post)
REV: 08/2014
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
Replace following components after airbag deployment:Deployed Seat airbag:
• Replace airbag module and, if necessary, seat cover with upholstery, [if deployed] [AIRBAG,FRONT SEAT]
• Active head restraint. The gas generator can be replaced up to 5 times. (if equipped)
Deployed Driver's airbag:
• Driver's airbag [AIRBAG,STEERING WHEEL]
• Replace steering wheel
Deployed Front passenger airbag:
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Dashboard trim panel (must be replaced with vehicles without replaceable airbag cover!)
Deployed Head airbag:
• Head airbag [AIRBAG,ROOF]
Check components for damage, replace if necessary
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
Check and/or replace following components after airbag triggering:Satellites (control unit + sensor):
• Read fault memory/ rectify faults
• Satellite, B-pillar, left/right [AIRBAG SENSOR,SIDE]
• Satellite, front door [AIRBAG SENSOR,FRT DOOR]
• Satellite, driver's/front passenger side [AIRBAG SENSOR,FRT BMPR]
• Satellite, vehicle centre [MODULE, AIRBAG CONTROL]
Cables and connectors:
• Check cables and plugs for damage, replace if necessary
Seat belt system:
• Automatic reel
• Belt buckle tensioner
• Seat belt height adjustment
• End fitting pretensioner
Seats:
• Seats
• Airbag module
Driver's airbag:
• Airbag module
• Steering Wheel
• Steering column
Front passenger airbag:
• Airbag module
• Dashboard trim panel (must be replaced with vehicles without
replaceable airbag cover!)
• Supporting tube
Side airbag, front:
• Airbag module
• Seat
Head airbag:
• Airbag module
• Cover, A-pillar
• Roofliner
• Trim, B-pillar
• Trim, C-pillar
• Connection/mount (on side frame)
Passive knee protector:
• Trim panels (driver's side)
• Glovebox incl. knee protector (passenger side)
• Check fastening elements
• Check components; replace if necessary
Important!
Only repair those cables which show visible signs of damage. In the event of visible damage, make sure there is only one cable repair in effect after the repair work. If no visible damage can be identified, the entire cable must be replaced. When carrying out repairs to the airbag wiring harness, you must use the spare parts offered in the out Electronic Parts Catalogue (EPC).
| Additional Information |