OEM Restraints System Part Replacement Search
2011 Lexus LS
DISABLE PROCEDURE AND TIME (Always Check Service Manual)
Always confirm DTCs before disconnecting the cable from the negative (-) battery terminal.1. Turn ignition switch to OFF and remove key.
2. Disconnect and isolate negative battery cable.
3. Wait at least 90 seconds.
REV: 08/2012
PARTS THAT MUST BE REPLACED FOLLOWING A DEPLOYMENT
When any of the airbags have deployed due to the collision, be sure to replace all sensors in the damaged areas and center airbag sensor assembly. [AIRBAG SENSOR,FRONT; AIRBAG SENSOR,SIDE; AIRBAG SENSOR,QTR PANEL; MODULE,AIRBAG CONTROL][Deployed Airbags]
• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat side airbag [AIRBAG & SEAT BACK ASSY]
• Active headrest inflator • When replacing a deployed active headrest inflator, always replace it together with the headrest.
• Driver side knee airbag [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag [AIRBAG,KNEE BOLSTER]
• Rear seat side airbag [AIRBAG & SEAT BACK ASSY]
• Seat cushion airbag [W/OTTOMAN] [AIRBAG,REAR SEAT]
PARTS THAT MUST BE INSPECTED AND REPLACED IF DAMAGED
• Perform a diagnostic system check• Steering pad [AIRBAG,STEERING WHEEL]
• Front passenger airbag [AIRBAG,INSTRUMENT PNL]
• Curtain shield airbag [AIRBAG,ROOF]
• Front seat side airbag [AIRBAG & SEAT BACK ASSY]
• Active headrest inflator [UNIT,ACTIVE HEADREST]
• Driver side knee airbag [AIRBAG,KNEE BOLSTER]
• Front passenger side knee airbag [AIRBAG,KNEE BOLSTER]
• Rear seat side airbag [AIRBAG & SEAT BACK ASSY]
• Seat cushion airbag [AIRBAG,REAR SEAT]
• Seat belt pretensioner
• Center airbag sensor [MODULE,AIRBAG CONTROL]
• Front airbag sensor [AIRBAG SENSOR,FRONT]
• Side airbag sensor [AIRBAG SENSOR,SIDE]
• Rear airbag sensor [AIRBAG SENSOR,QTR PANEL]
• Occupant classification ECU and initialization requirements [AIRBAG MODULE,INTERIOR]
• Seat position airbag sensor [AIRBAG SENSOR,SEAT TRACK]
Replace the faulty parts of the seat belt systems (outer belt, inner belt, bolts, nuts, adjustable shoulder anchor, tether anchor hardware and other related parts). When inspecting a vehicle that was in a collision, be sure to check all of the seat belt systems regardless of whether or not the system was activated in the collision. Replace any damaged or malfunctioning systems
| Additional Information |